All tests / FAA Part 107 drone pilot test / Physiology and decision-making
FAA Part 107 drone pilot test: Physiology and decision-making practice
55 practice questions on Physiology and decision-making for the FAA Part 107 drone pilot test. Each answer comes with an explanation and the official source.
Tests aeronautical decision-making, hazardous attitudes, IMSAFE fitness checklists, fatigue, spatial disorientation, and risk mitigation.
Sample questions
How is intoxication usually measured for the purpose of aviation regulations?
- As a percentage by weight in the blood. (correct answer)
- As a total volume of alcohol consumed per hour.
- As a ratio of alcohol to lung capacity.
- As a direct measurement of liver enzyme activity.
Intoxication is determined by the amount of alcohol in the bloodstream, which is usually measured as a percentage by weight in the blood.
Intoxication is determined by the amount of alcohol in the bloodstream. This is usually measured as a percentage by weight in the blood.
What blood alcohol level is required by 14 CFR part 91 for piloting an aircraft?
- Less than .08 percent
- Less than .04 percent (correct answer)
- Exactly .00 percent
- Less than .02 percent
Federal regulations require that a pilot's blood alcohol level be less than .04 percent.
14 CFR part 91 requires that blood alcohol level be less than .04 percent and that 8 hours pass between drinking alcohol and piloting an aircraft.
What is the minimum required time that must pass between drinking alcohol and piloting an aircraft?
- 12 hours
- 24 hours
- 4 hours
- 8 hours (correct answer)
Regulations mandate that 8 hours must pass between drinking alcohol and piloting an aircraft.
14 CFR part 91 requires that blood alcohol level be less than .04 percent and that 8 hours pass between drinking alcohol and piloting an aircraft.
When scanning effectively, what should be the maximum duration of each stop?
- 10 seconds
- 2 to 3 seconds (correct answer)
- 1 second
- 4 to 5 seconds
The duration of each scanning stop depends on the required detail, but no stop should last longer than 2 to 3 seconds.
The duration of each stop is based on the degree of detail that is required, but no stop should last longer than 2 to 3 seconds.
When moving from one viewing point to the next while scanning, by how much should pilots overlap the previous field of view?
- 10 degrees (correct answer)
- 5 degrees
- 15 degrees
- 30 degrees
When moving from one viewing point to the next, pilots should overlap the previous field of view by 10°.
When moving from one viewing point to the next, pilots should overlap the previous field of view by 10°.
Other topics on this test
-
Regulations68 questionsPractice
-
Airspace and flight restrictions30 questionsPractice
-
Weather45 questionsPractice
-
Loading and performance29 questionsPractice
-
Airport operations and maintenance28 questionsPractice
Sources
FAA-G-8082-22, retrieved November 16, 2026
Current text, retrieved November 16, 2026
FAA-H-8083-25C, 2023
The real test uses an FAA testing supplement with sectional charts. Chart-reading questions are not included here. ExamVerdict is not affiliated with Federal Aviation Administration (FAA). Check the official material before test day.