All tests / FAA Private Pilot knowledge test / Weight, balance and performance
FAA Private Pilot knowledge test: Weight, balance and performance practice
227 practice questions on Weight, balance and performance for the FAA Private Pilot knowledge test. Each answer comes with an explanation and the official source.
Examines density altitude, takeoff/landing distance charts, crosswind components, weight shift, and CG envelope checks.
Sample questions
What are the two variable factors that a pilot controls that can change both the total weight and the center of gravity location of an aircraft?
- Cargo distribution and passenger weight
- Equipment removal and fuel management
- Fuel management and passenger seating
- Loading and fuel management (correct answer)
The pilot controls loading and fuel management, which are the two variable factors that can change both total weight and center of gravity location.
The pilot controls loading and fuel management (the two variable factors that can change both total weight and CG location) of a particular aircraft.
What is the definition of Mean Aerodynamic Chord (MAC) for fixed-wing aircraft?
- The distance between the wing tips
- The distance from the nose to the tail of the aircraft
- The average distance from the leading edge to the trailing edge of the wing (correct answer)
- The total surface area of the wing divided by the span
MAC is defined as the average distance from the leading edge to the trailing edge of the wing.
MAC is the average distance from the leading edge to the trailing edge of the wing.
Under 14 CFR part 91, what is the pilot in command required to do regarding aircraft weight and balance?
- Comply with the operating limits in the approved AFM (correct answer)
- Conduct a weight and balance calculation before every flight
- Update the equipment list before every flight
- Record the weight of all passengers and baggage in the logbook
While there is no requirement to conduct calculations before each flight, the pilot in command must comply with the operating limits in the approved AFM, which include weight and balance.
While there are no specified requirements for a pilot operating under 14 CFR part 91 to conduct weight and balance calculations prior to each flight, 14 CFR part 91, section 91.9 requires the pilot in command (PIC) to comply with the operating limits in the approved AFM. These limits include the weight and balance of the aircraft.
What is the formula used to calculate the moment for an item in an aircraft?
- Weight minus arm
- Weight multiplied by arm (correct answer)
- Weight plus arm
- Weight divided by arm
The text specifies that the moment is calculated by multiplying the weight by the arm.
Remember “weight x arm = moment.”
How is the center of gravity (CG) determined once the total weight and total moment are known?
- Subtract the total weight from the total moment
- Multiply the total weight by the total moment
- Divide the total moment by the total weight (correct answer)
- Add the total weight to the total moment
To find the CG, the total moment is divided by the total weight.
To determine the CG, divide the total moment by the total weight.
Other topics on this test
-
Regulations239 questionsPractice
-
Airports and airspace146 questionsPractice
-
Weather149 questionsPractice
-
Aerodynamics225 questionsPractice
-
Aircraft and systems374 questionsPractice
-
Flight instruments100 questionsPractice
-
Navigation118 questionsPractice
-
Decision-making and aeromedical factors320 questionsPractice
Sources
FAA-H-8083-25C, 2023
Text as of November 1, 2026
Questions are written from FAA publications. Real test questions have three answer choices and some use the FAA testing supplement. ExamVerdict is not affiliated with Federal Aviation Administration (FAA). Check the official material before test day.