ExamVerdict

All tests / FAA Commercial Pilot (CAX) knowledge test / Aerodynamics, performance and weight

FAA Commercial Pilot (CAX) knowledge test: Aerodynamics, performance and weight practice

186 practice questions on Aerodynamics, performance and weight for the FAA Commercial Pilot (CAX) knowledge test. Each answer comes with an explanation and the official source.

Examines high-speed aerodynamics, load factors, weight and balance computations, climb/range performance charts, and density altitude effects.

or practice the whole test

Sample questions

How do high-viscosity fluids behave compared to low-viscosity fluids?
  1. High-viscosity fluids are thin; low-viscosity fluids are thick.
  2. High-viscosity fluids are "thick" and resist flow; low-viscosity fluids are "thin" and flow easily. (correct answer)
  3. High-viscosity fluids flow slowly; low-viscosity fluids flow at different rates.
  4. High-viscosity fluids flow easily; low-viscosity fluids are thick.

High-viscosity fluids are "thick" and resist flow. Low-viscosity fluids are "thin" and flow easily. Air has a low viscosity and flows easily.

FAA, Pilot's Handbook of Aeronautical Knowledge (FAA-H-8083-25C), FAA-H-8083-25C, 2023, PHAK Chapters 4, 5, 10 and 11, part 2
High-viscosity fluids are “thick” and resist flow; low-viscosity fluids are “thin” and flow easily. Air has a low viscosity and flows easily.
What is the layer of molecules that adhere to the wing surface referred to as?
  1. Adhesion layer
  2. Flow layer
  3. Boundary layer (correct answer)
  4. Friction layer

The layer of molecules that adhere to the wing surface is referred to as the boundary layer. Air molecules near the surface of the wing resist motion and have a relative velocity near zero. The roughness of the surface impedes their motion.

FAA, Pilot's Handbook of Aeronautical Knowledge (FAA-H-8083-25C), FAA-H-8083-25C, 2023, PHAK Chapters 4, 5, 10 and 11, part 2
The layer of molecules that adhere to the wing surface is referred to as the boundary layer.
As air density decreases, what is the effect on aircraft performance?
  1. Aircraft performance decreases (correct answer)
  2. Lift increases
  3. Power increases
  4. Thrust increases

As air becomes less dense, it reduces power, thrust, and lift. A decrease in air density means a high density altitude. Conversely as air density decreases (higher density altitude), aircraft performance decreases.

FAA, Pilot's Handbook of Aeronautical Knowledge (FAA-H-8083-25C), FAA-H-8083-25C, 2023, PHAK Chapters 4, 5, 10 and 11, part 4
as air becomes less dense, it reduces: • Power because the engine takes in less air • Thrust because a propeller is less efficient in thin air • L ift because the thin air exerts less force on the airfoils
An airfoil is constructed in such a way that its shape takes advantage of the air’s response to certain physical laws?
  1. It is designed to maintain constant lift regardless of flight conditions
  2. It is designed to take advantage of the air’s response to certain physical laws (correct answer)
  3. It is designed to create only positive pressure lift
  4. It is designed to maximize wind resistance

An airfoil is constructed in such a way that its shape takes advantage of the air’s response to certain physical laws. This develops two actions from the air mass: a positive pressure lifting action from the air mass below the wing, and a negative pressure lifting action from lowered pressure above the wing.

FAA, Pilot's Handbook of Aeronautical Knowledge (FAA-H-8083-25C), FAA-H-8083-25C, 2023, PHAK Chapters 4, 5, 10 and 11, part 8
An airfoil is constructed in such a way that its shape takes advantage of the air’s response to certain physical laws. This develops two actions from the air mass: a positive pressure lifting action from the air mass below the wing, and a negative pressure lifting action from lowered pressure above the wing.
What is the relative humidity expressed as?
  1. The difference between warm and cold air masses
  2. A percentage of the maximum amount of water vapor the air can hold (correct answer)
  3. A measure of air temperature
  4. The amount of water vapor suspended in the atmosphere

Humidity, also called relative humidity, refers to the amount of water vapor contained in the atmosphere and is expressed as a percentage of the maximum amount of water vapor the air can hold. This amount varies with temperature. Perfectly dry air that contains no water vapor has a relative humidity of zero percent, while saturated air, which cannot hold any more water vapor, has a relative humidity of 100 percent.

FAA, Pilot's Handbook of Aeronautical Knowledge (FAA-H-8083-25C), FAA-H-8083-25C, 2023, PHAK Chapters 4, 5, 10 and 11, part 5
Humidity, also called relative humidity, refers to the amount of water vapor contained in the atmosphere and is expressed as a percentage of the maximum amount of water vapor the air can hold.

Other topics on this test

Sources

14 CFR Part 91, General Operating and Flight Rules (eCFR)
Current text, retrieved November 16, 2026

Questions are written from official FAA handbooks and 14 CFR Parts 61 and 91. Chart and figure-reading items are excluded. ExamVerdict is not affiliated with Federal Aviation Administration (FAA). Check the official material before test day.