All tests / FAA Commercial Pilot (CAX) knowledge test / Airplane systems and flight instruments
FAA Commercial Pilot (CAX) knowledge test: Airplane systems and flight instruments practice
183 practice questions on Airplane systems and flight instruments for the FAA Commercial Pilot (CAX) knowledge test. Each answer comes with an explanation and the official source.
Covers constant-speed propellers, retractable landing gear, turbocharging, pressurization, fuel injection, and glass-cockpit flight instruments.
Sample questions
What constitute the primary control system of aircraft flight controls?
- Ailerons, elevator (or stabilator), and rudder (correct answer)
- Rods, cables, pulleys, and sometimes chains
- Wing flaps, leading edge devices, spoilers, and trim systems
- Cyclic stick, collective lever, and anti-torque pedals
The ailerons, elevator (or stabilator), and rudder constitute the primary control system and are required to control an aircraft safely during flight. This system is part of aircraft flight control systems.
The ailerons, elevator (or stabilator), and rudder constitute the primary control system and are required to control an aircraft safely during flight.
What is the function of the secondary control system?
- To replace the physical connection between pilot controls and the flight control surfaces
- To provide adequate responsiveness to control inputs
- To transmit forces from the flight deck controls to the control surfaces
- To improve the performance characteristics of the airplane or relieve the pilot of excessive control forces (correct answer)
Wing flaps, leading edge devices, spoilers, and trim systems constitute the secondary control system. This system improves the performance characteristics of the airplane or relieves the pilot of excessive control forces.
Wing flaps, leading edge devices, spoilers, and trim systems constitute the secondary control system and improve the performance characteristics of the airplane or relieve the pilot of excessive control forces.
What are the most basic flight control system designs?
- Fiber optic cables
- Hydromechanical designs
- Electric motors
- Mechanical (correct answer)
The most basic flight control system designs are mechanical. These designs date back to early aircraft.
The most basic flight control system designs are mechanical and date back to early aircraft.
Ailerons control roll about which axis of rotation?
- Lateral axis
- Directional axis
- Vertical axis
- Longitudinal axis (correct answer)
Ailerons control roll about the longitudinal axis. Control surface inputs cause movement about the three axes of rotation.
Ailerons control roll about the longitudinal axis.
Moving the control wheel, or control stick, to the right causes which aileron to deflect upward?
- Both ailerons
- Left aileron
- Neither aileron
- Right aileron (correct answer)
Moving the control wheel, or control stick, to the right causes the right aileron to deflect upward. The upward deflection of the right aileron decreases the camber resulting in decreased lift on the right wing.
Moving the control wheel, or control stick, to the right causes the right aileron to deflect upward and the left aileron to deflect downward.
Other topics on this test
-
Commercial pilot privileges and regulations114 questionsPractice
-
Aerodynamics, performance and weight186 questionsPractice
-
Weather, airspace and navigation243 questionsPractice
-
Commercial maneuvers and complex operations184 questionsPractice
-
Risk management, aeromedical and emergencies135 questionsPractice
Sources
FAA-H-8083-25C, 2023
FAA-H-8083-3C, 2021
Current text, retrieved November 16, 2026
Current text, retrieved November 16, 2026
Questions are written from official FAA handbooks and 14 CFR Parts 61 and 91. Chart and figure-reading items are excluded. ExamVerdict is not affiliated with Federal Aviation Administration (FAA). Check the official material before test day.