ExamVerdict

All tests / FAA Instrument Rating (IRA) knowledge test / Navigation systems and databases

FAA Instrument Rating (IRA) knowledge test: Navigation systems and databases practice

107 practice questions on Navigation systems and databases for the FAA Instrument Rating (IRA) knowledge test. Each answer comes with an explanation and the official source.

Covers VOR service volumes, ILS localizer/glideslope, DME arcs, RNAV/RNP WAAS precision, and navigation database currency.

or practice the whole test

Sample questions

Which frequency range is used by NDB ground equipment?
  1. 190 to 535 kHz (correct answer)
  2. 550 to 1650 kHz
  3. 100 to 190 kHz
  4. 1650 to 2000 kHz

The NDB ground equipment transmits in the frequency range of 190 to 535 kHz. While ADFs can tune to the AM broadcast band (550 to 1650 kHz), those frequencies are not approved for navigation.

FAA, Instrument Flying Handbook (FAA-H-8083-15B), FAA-H-8083-15B, retrieved November 16, 2026, IFH Chapter 9: Navigation Systems, part 3
The ground equipment, the NDB, transmits in the frequency range of 190 to 535 kHz.
What is the definition of relative bearing (RB) in the context of ADF navigation?
  1. The number of degrees measured clockwise between the aircraft’s heading and the direction to the station (correct answer)
  2. The direction to a station measured relative to magnetic north
  3. The direction the aircraft is pointed with respect to magnetic north
  4. The difference between the magnetic bearing and the aircraft's heading

Relative bearing is defined as the number of degrees measured clockwise between the aircraft’s heading and the direction from which the bearing is taken.

FAA, Instrument Flying Handbook (FAA-H-8083-15B), FAA-H-8083-15B, retrieved November 16, 2026, IFH Chapter 9: Navigation Systems, part 3
It is the number of degrees measured clockwise between the aircraft’s heading and the direction from which the bearing is taken.
Why are AM broadcast band frequencies not approved for navigation when using an ADF?
  1. They do not continuously identify themselves and are susceptible to sky wave propagation (correct answer)
  2. They are only available during daylight hours
  3. They operate at frequencies too high for the ADF receiver to process
  4. They are limited to voice transmissions only

AM broadcast band frequencies are not approved for navigation because the stations do not continuously identify themselves and are highly susceptible to sky wave propagation, particularly from dusk to dawn.

FAA, Instrument Flying Handbook (FAA-H-8083-15B), FAA-H-8083-15B, retrieved November 16, 2026, IFH Chapter 9: Navigation Systems, part 3
However, these frequencies are not approved for navigation because stations do not continuously identify themselves, and they are much more susceptible to sky wave propagation especially from dusk to dawn.
When tracking inbound using an ADF, what does a rapid rate of bearing change with a constant heading indicate?
  1. The aircraft is drifting due to an incorrect wind correction angle.
  2. The aircraft has reached the station and is now passing over it.
  3. A strong crosswind or close proximity to the station or both. (correct answer)
  4. The ADF needle is malfunctioning and requires recalibration.

A rapid rate of bearing change while maintaining a constant heading is a sign of either a strong crosswind, the aircraft being close to the station, or both.

FAA, Instrument Flying Handbook (FAA-H-8083-15B), FAA-H-8083-15B, retrieved November 16, 2026, IFH Chapter 9: Navigation Systems, part 5
A rapid rate of bearing change with a constant heading indicates either a strong crosswind or close proximity to the station or both.
When tracking inbound with an ADF, what is the standard procedure for the initial intercept angle when the needle is deflected?
  1. Turn to a heading that matches the wind correction angle.
  2. Maintain the current heading until the needle centers itself.
  3. Double the relative bearing when turning toward the course. (correct answer)
  4. Turn to the heading that produces a 5-degree relative bearing.

To capture the relative bearing (RB) when tracking inbound, it is standard to double the RB when turning toward the course.

FAA, Instrument Flying Handbook (FAA-H-8083-15B), FAA-H-8083-15B, retrieved November 16, 2026, IFH Chapter 9: Navigation Systems, part 5
Initially, it is standard to double the RB when turning toward your course.

Other topics on this test

Sources

FAA, Instrument Flying Handbook (FAA-H-8083-15B)
FAA-H-8083-15B, retrieved November 16, 2026
FAA, Instrument Procedures Handbook (FAA-H-8083-16B)
FAA-H-8083-16B, retrieved November 16, 2026

Questions are written from the FAA Instrument Flying and Instrument Procedures handbooks. Chart-reading questions from the testing supplement are not included. ExamVerdict is not affiliated with Federal Aviation Administration (FAA). Check the official material before test day.