All tests / FCC Element 1: Marine Radio Operator Permit exam / Communications Procedures
FCC Element 1: Marine Radio Operator Permit exam: Communications Procedures practice
48 practice questions on Communications Procedures for the FCC Element 1: Marine Radio Operator Permit exam. Each answer comes with an explanation and the official source.
Tests distress (MAYDAY), urgency (PAN-PAN), safety (SECURITE) priority calls, DSC alerts, and Coast Guard watch frequencies.
Sample questions
What traffic management service is operated by the U.S. Coast Guard in certain designated water areas to prevent ship collisions, groundings and environmental harm?
- Water Safety Management Bureau (WSMB).
- Vessel Traffic Service (VTS). (correct answer)
- Ship Movement and Safety Agency (SMSA).
- Interdepartmental Harbor and Port Patrol (IHPP).
Vessel Traffic Service is the correct traffic management service operated by the U.S. Coast Guard for collision and grounding prevention. The Water Safety Management Bureau, Ship Movement and Safety Agency, and Interdepartmental Harbor and Port Patrol are not the official names for this specific operational service.
1-7B1: What traffic management service is operated by the U.S. Coast Guard in certain designated water areas to prevent ship collisions, groundings and environmental harm? Official answer B: Vessel Traffic Service (VTS).
What is a bridge-to-bridge station?
- An internal communications system linking the wheel house with the ship’s primary radio operating position and other integral ship control points.
- An inland waterways and coastal radio station serving ship stations operating within the United States.
- A portable ship station necessary to eliminate frequent application to operate a ship station on board different vessels.
- A VHF radio station located on a ship’s navigational bridge or main control station that is used only for navigational communications. (correct answer)
A bridge-to-bridge station is specifically a VHF radio station on the navigational bridge or main control station. The other options describe internal communication systems, inland radio stations, or portable stations, which are not the definition of a bridge-to-bridge station.
1-7B2: What is a bridge-to-bridge station? Official answer D: A VHF radio station located on a ship’s navigational bridge or main control station that is used only for navigational communications.
When may a bridge-to-bridge transmission be more than 1 watt?
- When broadcasting a distress message and rounding a bend in a river or traveling in a blind spot. (correct answer)
- When broadcasting a distress message.
- When rounding a bend in a river or traveling in a blind spot.
- When calling the Coast Guard.
The official answer is correct because a bridge-to-bridge transmission may exceed one watt specifically when broadcasting a distress message while rounding a bend or in a blind spot. The other options are insufficient because they do not include both the distress message requirement and the specific navigational condition for exceeding one watt.
1-7B3: When may a bridge-to-bridge transmission be more than 1 watt? Official answer A: When broadcasting a distress message and rounding a bend in a river or traveling in a blind spot.
When is it legal to transmit high power on Channel 13?
- Failure of vessel being called to respond.
- In a blind situation such as rounding a bend in a river.
- During an emergency.
- All of these. (correct answer)
The official answer is correct because high power transmission on Channel 13 is permitted under various specific circumstances. Transmitting when a vessel fails to respond, in a blind situation like rounding a river bend, and during an emergency are all legally recognized exceptions. Therefore, the other choices are incomplete because they only list single scenarios, not the comprehensive allowance.
1-7B4: When is it legal to transmit high power on Channel 13? Official answer D: All of these.
A ship station using VHF bridge-to-bridge Channel 13:
- May be identified by the name of the ship in lieu of call sign. (correct answer)
- May be identified by call sign and country of origin.
- Must be identified by call sign and name of vessel.
- Does not need to identify itself within 100 miles from shore.
The rule allows identification by the ship's name instead of the call sign when using VHF bridge-to-bridge Channel 13. Identifying by call sign and country of origin is not the required method, nor is it the only permitted method. The requirement to identify within 100 miles from shore is incorrect for this specific channel use.
1-7B5: A ship station using VHF bridge-to-bridge Channel 13: Official answer A: May be identified by the name of the ship in lieu of call sign.
Other topics on this test
-
Rules & Regulations49 questionsPractice
-
Equipment Operations40 questionsPractice
-
Other Equipment40 questionsPractice
Sources
Approved June 25, 2009 (FCC public notice DA 09-1417)
Current text, retrieved November 16, 2026
Check the current pool on fcc.gov and with your COLEM before your exam. ExamVerdict is not affiliated with Federal Communications Commission (FCC), given by COLEMs. Check the official material before test day.