ExamVerdict

All tests / Ham radio Amateur Extra license exam / Amateur Practices

Ham radio Amateur Extra license exam: Amateur Practices practice

60 practice questions on Amateur Practices for the Ham radio Amateur Extra license exam. Each answer comes with an explanation and the official source.

Focuses on spectrum analyzers, vector network analyzers, phase-noise testing, receiver blocking dynamic range, and shielding.

or practice the whole test

Sample questions

Which of the following limits the highest frequency signal that can be accurately displayed on a digital oscilloscope?
  1. Sampling rate of the analog-to-digital converter (correct answer)
  2. Analog-to-digital converter reference frequency
  3. Q of the circuit
  4. All these choices are correct

The sampling rate of the analog-to-digital converter determines the maximum frequency that can be accurately captured, based on the Nyquist-Shannon sampling theorem. The analog-to-digital converter reference frequency and Q of the circuit do not directly limit the highest displayable frequency in this context. Therefore, only the sampling rate is the correct limiting factor.

NCVEC Amateur Extra Class Question Pool 2024-2028, Public release with 4th errata of February 4, 2026, released into the public domain, Subelement E4, group E4A, question E4A01
E4A01 (A): Which of the following limits the highest frequency signal that can be accurately displayed on a digital oscilloscope? Official answer A: Sampling rate of the analog-to-digital converter
Which of the following parameters does a spectrum analyzer display on the vertical and horizontal axes?
  1. Signal amplitude and time
  2. Signal amplitude and frequency (correct answer)
  3. SWR and frequency
  4. SWR and time

A spectrum analyzer plots signal amplitude against frequency on its axes. Signal amplitude and time is incorrect because time is not the primary horizontal axis for spectral analysis. SWR and frequency is wrong because SWR is a reflection measurement, not the primary vertical display. SWR and time is incorrect as neither is the standard display for a spectrum analyzer.

NCVEC Amateur Extra Class Question Pool 2024-2028, Public release with 4th errata of February 4, 2026, released into the public domain, Subelement E4, group E4A, question E4A02
E4A02 (B): Which of the following parameters does a spectrum analyzer display on the vertical and horizontal axes? Official answer B: Signal amplitude and frequency
Which of the following test instruments is used to display spurious signals and/or intermodulation distortion products generated by an SSB transmitter?
  1. Differential resolver
  2. Spectrum analyzer (correct answer)
  3. Logic analyzer
  4. Network analyzer

A spectrum analyzer is designed to display the frequency content of a signal, making it ideal for viewing spurious signals and intermodulation distortion. A differential resolver measures voltage differences, a logic analyzer examines digital signals, and a network analyzer measures signal magnitude and phase across a frequency range, none of which are suited for visualizing spectral purity.

NCVEC Amateur Extra Class Question Pool 2024-2028, Public release with 4th errata of February 4, 2026, released into the public domain, Subelement E4, group E4A, question E4A03
E4A03 (B): Which of the following test instruments is used to display spurious signals and/or intermodulation distortion products generated by an SSB transmitter? Official answer B: Spectrum analyzer
How is compensation of an oscilloscope probe performed?
  1. A square wave is displayed, and the probe is adjusted until the horizontal portions of the displayed wave are as nearly flat as possible (correct answer)
  2. A high frequency sine wave is displayed, and the probe is adjusted for maximum amplitude
  3. A frequency standard is displayed, and the probe is adjusted until the deflection time is accurate
  4. A DC voltage standard is displayed, and the probe is adjusted until the displayed voltage is accurate

Compensation is performed by adjusting the probe's variable capacitor to match the input capacitance of the oscilloscope, which ensures a flat frequency response. A square wave is used because any deviation from a flat top indicates that the probe is either under-compensated or over-compensated. Other methods like using sine waves, frequency standards, or DC voltage standards do not provide the necessary visual feedback to balance the capacitive divider network.

NCVEC Amateur Extra Class Question Pool 2024-2028, Public release with 4th errata of February 4, 2026, released into the public domain, Subelement E4, group E4A, question E4A04
E4A04 (A): How is compensation of an oscilloscope probe performed? Official answer A: A square wave is displayed, and the probe is adjusted until the horizontal portions of the displayed wave are as nearly flat as possible
What is the purpose of using a prescaler with a frequency counter?
  1. Amplify low-level signals for more accurate counting
  2. Multiply a higher frequency signal so a low-frequency counter can display the operating frequency
  3. Prevent oscillation in a low-frequency counter circuit
  4. Reduce the signal frequency to within the counter's operating range (correct answer)

The official answer is correct because a prescaler divides a high input frequency down to a manageable rate. This allows the counter to accurately measure frequencies that are too fast for its internal circuitry. The other options are incorrect because the prescaler does not amplify signals, multiply frequencies, or primarily prevent oscillation.

NCVEC Amateur Extra Class Question Pool 2024-2028, Public release with 4th errata of February 4, 2026, released into the public domain, Subelement E4, group E4A, question E4A05
E4A05 (D): What is the purpose of using a prescaler with a frequency counter? Official answer D: Reduce the signal frequency to within the counter's operating range

Other topics on this test

Sources

NCVEC Amateur Extra Class Question Pool 2024-2028
Public release with 4th errata of February 4, 2026, released into the public domain

Exams are given by accredited Volunteer Examiner teams. Check the current pool and any errata on ncvec.org before your exam session. ExamVerdict is not affiliated with Federal Communications Commission (FCC), given by Volunteer Examiners. Check the official material before test day.