ExamVerdict

All tests / Ham radio Amateur Extra license exam / Signals and Emissions

Ham radio Amateur Extra license exam: Signals and Emissions practice

46 practice questions on Signals and Emissions for the Ham radio Amateur Extra license exam. Each answer comes with an explanation and the official source.

Covers symbol rates, error-correction coding, spread spectrum, phase modulation sidebands, and SDR Nyquist limits.

or practice the whole test

Sample questions

What technique shows that a square wave is made up of a sine wave and its odd harmonics?
  1. Fourier analysis (correct answer)
  2. Vector analysis
  3. Numerical analysis
  4. Differential analysis

Fourier analysis is the correct technique because it decomposes complex periodic signals, like a square wave, into a sum of simple sine and cosine waves. This method specifically reveals that a square wave is composed only of its odd harmonics. Vector analysis, numerical analysis, and differential analysis do not perform this type of signal decomposition.

NCVEC Amateur Extra Class Question Pool 2024-2028, Public release with 4th errata of February 4, 2026, released into the public domain, Subelement E8, group E8A, question E8A01
E8A01 (A): What technique shows that a square wave is made up of a sine wave and its odd harmonics? Official answer A: Fourier analysis
Which of the following is a type of analog-to-digital conversion?
  1. Successive approximation (correct answer)
  2. Harmonic regeneration
  3. Level shifting
  4. Phase reversal

Successive approximation is a recognized method for converting analog signals to digital ones. Harmonic regeneration, level shifting, and phase reversal are not types of analog-to-digital conversion processes.

NCVEC Amateur Extra Class Question Pool 2024-2028, Public release with 4th errata of February 4, 2026, released into the public domain, Subelement E8, group E8A, question E8A02
E8A02 (A): Which of the following is a type of analog-to-digital conversion? Official answer A: Successive approximation
Which of the following describes a signal in the time domain?
  1. Power at intervals of phase
  2. Amplitude at different times (correct answer)
  3. Frequency at different times
  4. Discrete impulses in time order

A signal in the time domain directly shows how the signal's amplitude changes over time. Power at intervals of phase describes frequency domain concepts, and frequency at different times describes time-varying frequency, not a standard time domain signal. Discrete impulses in time order is a specific type of signal, but not the general description of a time domain signal.

NCVEC Amateur Extra Class Question Pool 2024-2028, Public release with 4th errata of February 4, 2026, released into the public domain, Subelement E8, group E8A, question E8A03
E8A03 (B): Which of the following describes a signal in the time domain? Official answer B: Amplitude at different times
What is “dither” with respect to analog-to-digital converters?
  1. An abnormal condition where the converter cannot settle on a value to represent the signal
  2. A small amount of noise added to the input signal to reduce quantization noise (correct answer)
  3. An error caused by irregular quantization step size
  4. A method of decimation by randomly skipping samples

Adding a small amount of noise helps spread the quantization error more evenly across the signal range. The other options describe settling issues, quantization step errors, or decimation techniques, none of which define dithering.

NCVEC Amateur Extra Class Question Pool 2024-2028, Public release with 4th errata of February 4, 2026, released into the public domain, Subelement E8, group E8A, question E8A04
E8A04 (B): What is “dither” with respect to analog-to-digital converters? Official answer B: A small amount of noise added to the input signal to reduce quantization noise
What is the benefit of making voltage measurements with a true-RMS calculating meter?
  1. An inverse Fourier transform can be used
  2. The signal’s RMS noise factor is also calculated
  3. The calculated RMS value can be converted directly into phasor form
  4. RMS is measured for both sinusoidal and non-sinusoidal signals (correct answer)

A true-RMS meter accurately measures the Root Mean Square value regardless of the waveform shape. This allows correct measurement for non-sinusoidal signals, unlike meters designed only for pure sine waves. The other options do not describe the primary benefit of a true-RMS measurement capability.

NCVEC Amateur Extra Class Question Pool 2024-2028, Public release with 4th errata of February 4, 2026, released into the public domain, Subelement E8, group E8A, question E8A05
E8A05 (D): What is the benefit of making voltage measurements with a true-RMS calculating meter? Official answer D: RMS is measured for both sinusoidal and non-sinusoidal signals

Other topics on this test

Sources

NCVEC Amateur Extra Class Question Pool 2024-2028
Public release with 4th errata of February 4, 2026, released into the public domain

Exams are given by accredited Volunteer Examiner teams. Check the current pool and any errata on ncvec.org before your exam session. ExamVerdict is not affiliated with Federal Communications Commission (FCC), given by Volunteer Examiners. Check the official material before test day.