All tests / Ham radio Amateur Extra license exam / Practical Circuits
Ham radio Amateur Extra license exam: Practical Circuits practice
84 practice questions on Practical Circuits for the Ham radio Amateur Extra license exam. Each answer comes with an explanation and the official source.
Examines PLL frequency synthesizers, DDS oscillators, SDR quadrature mixers, DSP filtering, and class AB/C/D amplifiers.
Sample questions
Which circuit is bistable?
- An AND gate
- An OR gate
- A flip-flop (correct answer)
- A bipolar amplifier
A flip-flop is bistable because it has two stable states, allowing it to remember information. An AND gate and an OR gate are combinational logic circuits that only produce an output based on current inputs. A bipolar amplifier is an analog component, not a digital memory circuit.
E7A01 (C): Which circuit is bistable? Official answer C: A flip-flop
What is the function of a decade counter?
- It produces one output pulse for every 10 input pulses (correct answer)
- It decodes a decimal number for display on a seven-segment LED display
- It produces 10 output pulses for every input pulse
- It decodes a binary number for display on a seven-segment LED display
A decade counter is designed to count up to ten before resetting, meaning it outputs one pulse for every ten input pulses. The other options describe decoding functions or incorrect pulse repetition rates, not the primary counting function of a decade counter.
E7A02 (A): What is the function of a decade counter? Official answer A: It produces one output pulse for every 10 input pulses
Which of the following can divide the frequency of a pulse train by 2?
- An XOR gate
- A flip-flop (correct answer)
- An OR gate
- A multiplexer
A flip-flop can divide the frequency of a pulse train by 2 because it inherently introduces a delay equivalent to one clock cycle. An XOR gate, an OR gate, and a multiplexer do not have this inherent frequency division property. The flip-flop's state change effectively halves the output frequency relative to the input.
E7A03 (B): Which of the following can divide the frequency of a pulse train by 2? Official answer B: A flip-flop
How many flip-flops are required to divide a signal frequency by 16?
- 4 (correct answer)
- 6
- 8
- 16
Four flip-flops are needed because each flip-flop divides the input frequency by two. Using six flip-flops would divide the frequency by 64, and eight flip-flops would divide it by 256. The required division factor is 16, which is $2^4$.
E7A04 (A): How many flip-flops are required to divide a signal frequency by 16? Official answer A: 4
Which of the following circuits continuously alternates between two states without an external clock signal?
- Monostable multivibrator
- J-K flip-flop
- T flip-flop
- Astable multivibrator (correct answer)
An astable multivibrator is designed to continuously switch between two states without needing an external clock. A monostable multivibrator only stays in a second state for a fixed time after a trigger. A J-K flip-flop and T flip-flop require a clock signal to change state.
E7A05 (D): Which of the following circuits continuously alternates between two states without an external clock signal? Official answer D: Astable multivibrator
Other topics on this test
-
Commission Rules66 questionsPractice
-
Operating Procedures58 questionsPractice
-
Radio Wave Propagation34 questionsPractice
-
Amateur Practices60 questionsPractice
-
Electrical Principles43 questionsPractice
-
Circuit Components59 questionsPractice
-
Signals and Emissions46 questionsPractice
-
Antennas and Transmission Lines79 questionsPractice
Sources
Public release with 4th errata of February 4, 2026, released into the public domain
Current text, retrieved November 16, 2026
Exams are given by accredited Volunteer Examiner teams. Check the current pool and any errata on ncvec.org before your exam session. ExamVerdict is not affiliated with Federal Communications Commission (FCC), given by Volunteer Examiners. Check the official material before test day.