ExamVerdict

All tests / Ham radio Amateur Extra license exam / Operating Procedures

Ham radio Amateur Extra license exam: Operating Procedures practice

58 practice questions on Operating Procedures for the Ham radio Amateur Extra license exam. Each answer comes with an explanation and the official source.

Covers contest exchanges, satellite tracking, EME moonbounce procedures, weak-signal VHF/UHF, and SSTV/digital operating.

or practice the whole test

Sample questions

What is the direction of an ascending pass for an amateur satellite?
  1. From west to east
  2. From east to west
  3. From south to north (correct answer)
  4. From north to south

An ascending pass for an amateur satellite always moves from south to north. Moving from west to east or east to west describes a different orbital motion. Moving from north to south is a descending pass, not an ascending one.

NCVEC Amateur Extra Class Question Pool 2024-2028, Public release with 4th errata of February 4, 2026, released into the public domain, Subelement E2, group E2A, question E2A01
E2A01 (C): What is the direction of an ascending pass for an amateur satellite? Official answer C: From south to north
Which of the following is characteristic of an inverting linear transponder?
  1. Doppler shift is reduced because the uplink and downlink shifts are in opposite directions
  2. Signal position in the band is reversed
  3. Upper sideband on the uplink becomes lower sideband on the downlink, and vice versa
  4. All these choices are correct (correct answer)

An inverting linear transponder causes the Doppler shift to be reduced because the uplink and downlink shifts oppose each other. The signal position is reversed, and the upper sideband on the uplink becomes the lower sideband on the downlink, and vice versa. Therefore, all listed characteristics are true for this type of transponder.

NCVEC Amateur Extra Class Question Pool 2024-2028, Public release with 4th errata of February 4, 2026, released into the public domain, Subelement E2, group E2A, question E2A02
E2A02 (D): Which of the following is characteristic of an inverting linear transponder? Official answer D: All these choices are correct
How is an upload signal processed by an inverting linear transponder?
  1. The signal is detected and remodulated on the reverse sideband
  2. The signal is passed through a nonlinear filter
  3. The signal is reduced to I and Q components, and the Q component is filtered out
  4. The signal is mixed with a local oscillator signal and the difference product is transmitted (correct answer)

An inverting linear transponder uses mixing with a local oscillator to shift the signal frequency. The other options describe processes that are not characteristic of this specific transponder type. For example, reducing to I and Q components and filtering out Q is not the standard processing method here.

NCVEC Amateur Extra Class Question Pool 2024-2028, Public release with 4th errata of February 4, 2026, released into the public domain, Subelement E2, group E2A, question E2A03
E2A03 (D): How is an upload signal processed by an inverting linear transponder? Official answer D: The signal is mixed with a local oscillator signal and the difference product is transmitted
What is meant by the “mode” of an amateur radio satellite?
  1. Whether the satellite is in a low earth or geostationary orbit
  2. The satellite’s uplink and downlink frequency bands (correct answer)
  3. The satellite’s orientation with respect to the Earth
  4. Whether the satellite is in a polar or equatorial orbit

The mode specifically refers to the operational frequencies used for communication, which are the uplink and downlink bands. The other choices describe orbital characteristics or physical orientation, not the operational mode of the satellite.

NCVEC Amateur Extra Class Question Pool 2024-2028, Public release with 4th errata of February 4, 2026, released into the public domain, Subelement E2, group E2A, question E2A04
E2A04 (B): What is meant by the “mode” of an amateur radio satellite? Official answer B: The satellite’s uplink and downlink frequency bands
What do the letters in a satellite’s mode designator specify?
  1. Power limits for uplink and downlink transmissions
  2. The location of the ground control station
  3. The polarization of uplink and downlink signals
  4. The uplink and downlink frequency ranges (correct answer)

The letters in a satellite's mode designator specify the uplink and downlink frequency ranges. The other choices describe operational parameters like power limits, ground station location, or signal polarization, which are not determined by the mode designator letters.

NCVEC Amateur Extra Class Question Pool 2024-2028, Public release with 4th errata of February 4, 2026, released into the public domain, Subelement E2, group E2A, question E2A05
E2A05 (D): What do the letters in a satellite’s mode designator specify? Official answer D: The uplink and downlink frequency ranges

Other topics on this test

Sources

NCVEC Amateur Extra Class Question Pool 2024-2028
Public release with 4th errata of February 4, 2026, released into the public domain

Exams are given by accredited Volunteer Examiner teams. Check the current pool and any errata on ncvec.org before your exam session. ExamVerdict is not affiliated with Federal Communications Commission (FCC), given by Volunteer Examiners. Check the official material before test day.