All tests / Ham radio General license exam / Amateur Radio Practices
Ham radio General license exam: Amateur Radio Practices practice
58 practice questions on Amateur Radio Practices for the Ham radio General license exam. Each answer comes with an explanation and the official source.
Covers oscilloscope traces, antenna analyzers, station audio levels, speech processors, and RF grounding in HF stations.
Sample questions
What is the purpose of the notch filter found on many HF transceivers?
- To restrict the transmitter voice bandwidth
- To reduce interference from carriers in the receiver passband (correct answer)
- To eliminate receiver interference from impulse noise sources
- To remove interfering splatter generated by signals on adjacent frequencies
The notch filter specifically targets and reduces unwanted carrier interference within the receiver's operating band. Restricting voice bandwidth or eliminating impulse noise are functions of different filtering types. Removing splatter is typically handled by other filtering or transmitter design features.
G4A01 (B): What is the purpose of the notch filter found on many HF transceivers? Official answer B: To reduce interference from carriers in the receiver passband
What is the benefit of using the opposite or “reverse” sideband when receiving CW?
- Interference from impulse noise will be eliminated
- More stations can be accommodated within a given signal passband
- It may be possible to reduce or eliminate interference from other signals (correct answer)
- Accidental out-of-band operation can be prevented
Using the opposite sideband helps by allowing the receiver to reject unwanted signals coming from other frequencies. The other options are incorrect because opposite sideband use does not eliminate impulse noise, increase station capacity, or prevent accidental out-of-band operation.
G4A02 (C): What is the benefit of using the opposite or “reverse” sideband when receiving CW? Official answer C: It may be possible to reduce or eliminate interference from other signals
How does a noise blanker work?
- By temporarily increasing received bandwidth
- By redirecting noise pulses into a filter capacitor
- By reducing receiver gain during a noise pulse (correct answer)
- By clipping noise peaks
The official answer is correct because a noise blanker actively lowers the receiver's gain when a noise pulse is detected. Temporarily increasing received bandwidth would worsen noise reception, and redirecting noise pulses into a filter capacitor is not the mechanism. Clipping noise peaks is a different form of signal processing, not the function of a noise blanker.
G4A03 (C): How does a noise blanker work? Official answer C: By reducing receiver gain during a noise pulse
What is the effect on plate current of the correct setting of a vacuum-tube RF power amplifier’s TUNE control?
- A pronounced peak
- A pronounced dip (correct answer)
- No change will be observed
- A slow, rhythmic oscillation
Correctly setting the TUNE control minimizes reflected power, which results in a pronounced dip in the plate current. A pronounced peak would indicate poor matching, and no change or slow oscillation would not reflect proper tuning conditions.
G4A04 (B): What is the effect on plate current of the correct setting of a vacuum-tube RF power amplifier’s TUNE control? Official answer B: A pronounced dip
Why is automatic level control (ALC) used with an RF power amplifier?
- To balance the transmitter audio frequency response
- To reduce harmonic radiation
- To prevent excessive drive (correct answer)
- To increase overall efficiency
Automatic level control prevents the RF power amplifier from being driven beyond its safe operating limits. Balancing the audio frequency response is handled by other components, and reducing harmonic radiation is a separate design goal. Increasing overall efficiency is not the primary function of ALC.
G4A05 (C): Why is automatic level control (ALC) used with an RF power amplifier? Official answer C: To prevent excessive drive
Other topics on this test
-
Commission's Rules52 questionsPractice
-
Operating Procedures60 questionsPractice
-
Radio Wave Propagation37 questionsPractice
-
Electrical Principles39 questionsPractice
-
Circuit Components23 questionsPractice
-
Practical Circuits32 questionsPractice
-
Signals and Emissions40 questionsPractice
-
Antennas and Feed Lines43 questionsPractice
-
Electrical and RF Safety25 questionsPractice
Sources
Public release with 6th errata of February 4, 2026, released into the public domain
Current text, retrieved November 16, 2026
Exams are given by accredited Volunteer Examiner teams. Check the current pool and any errata on ncvec.org before your exam session. ExamVerdict is not affiliated with Federal Communications Commission (FCC), given by Volunteer Examiners. Check the official material before test day.