ExamVerdict

All tests / Ham radio General license exam / Signals and Emissions

Ham radio General license exam: Signals and Emissions practice

40 practice questions on Signals and Emissions for the Ham radio General license exam. Each answer comes with an explanation and the official source.

Covers digital protocols, emission designators, intermodulation distortion, splattering, and occupied HF bandwidths.

or practice the whole test

Sample questions

How is direct binary FSK modulation generated?
  1. By keying an FM transmitter with a sub-audible tone
  2. By changing an oscillator’s frequency directly with a digital control signal (correct answer)
  3. By using a transceiver’s computer data interface protocol to change frequencies
  4. By reconfiguring the CW keying input to act as a tone generator

Direct binary FSK modulation involves altering the oscillator's frequency based on a digital signal. Keying an FM transmitter with a sub-audible tone is a form of analog modulation, not direct binary FSK. Using a transceiver’s computer data interface protocol is an application, not the fundamental generation method. Reconfiguring the CW keying input is not how direct binary FSK is generated.

NCVEC General Class Question Pool 2023-2027, Public release with 6th errata of February 4, 2026, released into the public domain, Subelement G8, group G8A, question G8A01
G8A01 (B): How is direct binary FSK modulation generated? Official answer B: By changing an oscillator’s frequency directly with a digital control signal
What is the name of the process that changes the phase angle of an RF signal to convey information?
  1. Phase convolution
  2. Phase modulation (correct answer)
  3. Phase transformation
  4. Phase inversion

Phase modulation is the specific process used to alter the phase angle of an RF signal to encode information. Phase convolution is a mathematical operation, phase transformation is a general term, and phase inversion simply flips the phase by 180 degrees, which is not the general method for conveying information.

NCVEC General Class Question Pool 2023-2027, Public release with 6th errata of February 4, 2026, released into the public domain, Subelement G8, group G8A, question G8A02
G8A02 (B): What is the name of the process that changes the phase angle of an RF signal to convey information? Official answer B: Phase modulation
What is the name of the process that changes the instantaneous frequency of an RF wave to convey information?
  1. Frequency convolution
  2. Frequency transformation
  3. Frequency conversion
  4. Frequency modulation (correct answer)

Frequency modulation is the specific process used to alter the instantaneous frequency of a radio frequency wave to encode information. Frequency convolution and Frequency transformation are not standard terms for this encoding method. Frequency conversion refers to changing the frequency to a different carrier, not encoding data onto the existing frequency variation.

NCVEC General Class Question Pool 2023-2027, Public release with 6th errata of February 4, 2026, released into the public domain, Subelement G8, group G8A, question G8A03
G8A03 (D): What is the name of the process that changes the instantaneous frequency of an RF wave to convey information? Official answer D: Frequency modulation
What emission is produced by a reactance modulator connected to a transmitter RF amplifier stage?
  1. Multiplex modulation
  2. Phase modulation (correct answer)
  3. Amplitude modulation
  4. Pulse modulation

A reactance modulator inherently changes the phase of the carrier signal. Amplitude modulation changes signal strength, not phase, while multiplex modulation and pulse modulation describe different signal encoding techniques.

NCVEC General Class Question Pool 2023-2027, Public release with 6th errata of February 4, 2026, released into the public domain, Subelement G8, group G8A, question G8A04
G8A04 (B): What emission is produced by a reactance modulator connected to a transmitter RF amplifier stage? Official answer B: Phase modulation
What type of modulation varies the instantaneous power level of the RF signal?
  1. Power modulation
  2. Phase modulation
  3. Frequency modulation
  4. Amplitude modulation (correct answer)

Amplitude modulation directly changes the strength of the radio frequency signal. Phase modulation, frequency modulation, and power modulation do not primarily vary the instantaneous power level in the way amplitude modulation does.

NCVEC General Class Question Pool 2023-2027, Public release with 6th errata of February 4, 2026, released into the public domain, Subelement G8, group G8A, question G8A05
G8A05 (D): What type of modulation varies the instantaneous power level of the RF signal? Official answer D: Amplitude modulation

Other topics on this test

Sources

NCVEC General Class Question Pool 2023-2027
Public release with 6th errata of February 4, 2026, released into the public domain

Exams are given by accredited Volunteer Examiner teams. Check the current pool and any errata on ncvec.org before your exam session. ExamVerdict is not affiliated with Federal Communications Commission (FCC), given by Volunteer Examiners. Check the official material before test day.