ExamVerdict

All tests / Ham radio General license exam / Antennas and Feed Lines

Ham radio General license exam: Antennas and Feed Lines practice

43 practice questions on Antennas and Feed Lines for the Ham radio General license exam. Each answer comes with an explanation and the official source.

Focuses on Yagi beams, inverted-V dipoles, baluns, coax velocity factor, ladder line, and feed-line attenuation.

or practice the whole test

Sample questions

Which of the following factors determine the characteristic impedance of a parallel conductor feed line?
  1. The distance between the centers of the conductors and the radius of the conductors (correct answer)
  2. The distance between the centers of the conductors and the length of the line
  3. The radius of the conductors and the frequency of the signal
  4. The frequency of the signal and the length of the line

The characteristic impedance of a parallel conductor feed line depends only on the geometry of the conductors. The distance between the centers and the radius define the physical structure that determines impedance. The length of the line and the signal frequency do not affect the characteristic impedance itself.

NCVEC General Class Question Pool 2023-2027, Public release with 6th errata of February 4, 2026, released into the public domain, Subelement G9, group G9A, question G9A01
G9A01 (A): Which of the following factors determine the characteristic impedance of a parallel conductor feed line? Official answer A: The distance between the centers of the conductors and the radius of the conductors
What is the relationship between high standing wave ratio (SWR) and transmission line loss?
  1. There is no relationship between transmission line loss and SWR
  2. High SWR increases loss in a lossy transmission line (correct answer)
  3. High SWR makes it difficult to measure transmission line loss
  4. High SWR reduces the relative effect of transmission line loss

When the standing wave ratio is high, more power is reflected back from the load, which increases the overall power loss in a transmission line that has inherent resistance. The other options incorrectly state there is no relationship or that high SWR reduces the effect of loss. High SWR directly contributes to greater energy dissipation in a lossy line.

NCVEC General Class Question Pool 2023-2027, Public release with 6th errata of February 4, 2026, released into the public domain, Subelement G9, group G9A, question G9A02
G9A02 (B): What is the relationship between high standing wave ratio (SWR) and transmission line loss? Official answer B: High SWR increases loss in a lossy transmission line
What is the nominal characteristic impedance of “window line” transmission line?
  1. 50 ohms
  2. 75 ohms
  3. 100 ohms
  4. 450 ohms (correct answer)

The nominal characteristic impedance of a window line transmission line is 450 ohms. The other values, 50 ohms, 75 ohms, and 100 ohms, represent common impedances for other types of transmission lines, not a window line.

NCVEC General Class Question Pool 2023-2027, Public release with 6th errata of February 4, 2026, released into the public domain, Subelement G9, group G9A, question G9A03
G9A03 (D): What is the nominal characteristic impedance of “window line” transmission line? Official answer D: 450 ohms
What causes reflected power at an antenna’s feed point?
  1. Operating an antenna at its resonant frequency
  2. Using more transmitter power than the antenna can handle
  3. A difference between feed line impedance and antenna feed point impedance (correct answer)
  4. Feeding the antenna with unbalanced feed line

Mismatch between the feed line and the antenna feed point causes reflected power because energy cannot be transferred efficiently. Operating at resonance minimizes this difference, while using more power or an unbalanced feed line does not inherently cause reflection. A difference in impedance is the direct cause of reflected power.

NCVEC General Class Question Pool 2023-2027, Public release with 6th errata of February 4, 2026, released into the public domain, Subelement G9, group G9A, question G9A04
G9A04 (C): What causes reflected power at an antenna’s feed point? Official answer C: A difference between feed line impedance and antenna feed point impedance
How does the attenuation of coaxial cable change with increasing frequency?
  1. Attenuation is independent of frequency
  2. Attenuation increases (correct answer)
  3. Attenuation decreases
  4. Attenuation follows Marconi’s Law of Attenuation

Higher frequencies cause greater signal loss in coaxial cable. Attenuation does not stay the same, nor does it decrease as frequency rises. Marconi’s Law of Attenuation does not describe this frequency dependency.

NCVEC General Class Question Pool 2023-2027, Public release with 6th errata of February 4, 2026, released into the public domain, Subelement G9, group G9A, question G9A05
G9A05 (B): How does the attenuation of coaxial cable change with increasing frequency? Official answer B: Attenuation increases

Other topics on this test

Sources

NCVEC General Class Question Pool 2023-2027
Public release with 6th errata of February 4, 2026, released into the public domain

Exams are given by accredited Volunteer Examiner teams. Check the current pool and any errata on ncvec.org before your exam session. ExamVerdict is not affiliated with Federal Communications Commission (FCC), given by Volunteer Examiners. Check the official material before test day.