ExamVerdict

All tests / Ham radio General license exam / Circuit Components

Ham radio General license exam: Circuit Components practice

23 practice questions on Circuit Components for the Ham radio General license exam. Each answer comes with an explanation and the official source.

Covers diodes, bipolar and field-effect transistors, vacuum tubes, op-amps, and voltage regulators in amateur gear.

or practice the whole test

Sample questions

What is the minimum allowable discharge voltage for maximum life of a standard 12-volt lead-acid battery?
  1. 6 volts
  2. 8.5 volts
  3. 10.5 volts (correct answer)
  4. 12 volts

Discharging a standard 12-volt lead-acid battery below 10.5 volts under load can cause permanent sulfation and significantly shorten its overall lifespan. The other choices either represent an excessively deep discharge that damages the internal chemistry or do not reflect the standard threshold recommended for preserving battery longevity.

NCVEC General Class Question Pool 2023-2027, Public release with 6th errata of February 4, 2026, released into the public domain, Subelement G6, group G6A, question G6A01
G6A01 (C): What is the minimum allowable discharge voltage for maximum life of a standard 12-volt lead-acid battery? Official answer C: 10.5 volts
What is an advantage of batteries with low internal resistance?
  1. Long life
  2. High discharge current (correct answer)
  3. High voltage
  4. Rapid recharge

Batteries with low internal resistance can deliver a high discharge current because less energy is wasted internally as heat when high power is drawn. The other choices, such as long life, high voltage, and rapid recharge, depend on different chemical and physical properties rather than directly on internal resistance.

NCVEC General Class Question Pool 2023-2027, Public release with 6th errata of February 4, 2026, released into the public domain, Subelement G6, group G6A, question G6A02
G6A02 (B): What is an advantage of batteries with low internal resistance? Official answer B: High discharge current
What is the approximate forward threshold voltage of a germanium diode?
  1. 0.1 volt
  2. 0.3 volts (correct answer)
  3. 0.7 volts
  4. 1.0 volts

Germanium semiconductor diodes typically begin conducting electricity at a forward threshold voltage of approximately 0.3 volts. In contrast, silicon diodes require about 0.7 volts, making the other values incorrect for a standard germanium junction.

NCVEC General Class Question Pool 2023-2027, Public release with 6th errata of February 4, 2026, released into the public domain, Subelement G6, group G6A, question G6A03
G6A03 (B): What is the approximate forward threshold voltage of a germanium diode? Official answer B: 0.3 volts
Which of the following is characteristic of an electrolytic capacitor?
  1. Tight tolerance
  2. Much less leakage than any other type
  3. High capacitance for a given volume (correct answer)
  4. Inexpensive RF capacitor

Electrolytic capacitors are specifically known for providing a very high capacitance for a given physical volume compared to other capacitor types. The other choices are incorrect because electrolytic capacitors typically have wide tolerances, relatively high leakage current, and are not suitable for high-frequency radio frequency applications.

NCVEC General Class Question Pool 2023-2027, Public release with 6th errata of February 4, 2026, released into the public domain, Subelement G6, group G6A, question G6A04
G6A04 (C): Which of the following is characteristic of an electrolytic capacitor? Official answer C: High capacitance for a given volume
What is the approximate forward threshold voltage of a silicon junction diode?
  1. 0.1 volt
  2. 0.3 volts
  3. 0.7 volts (correct answer)
  4. 1.0 volts

A silicon junction diode requires approximately 0.7 volts of forward bias to overcome its internal barrier potential and begin conducting significant current. Diodes made from germanium have a lower threshold of about 0.3 volts, while 0.1 volts and 1.0 volts do not correspond to the standard forward voltage drop of a typical silicon diode.

NCVEC General Class Question Pool 2023-2027, Public release with 6th errata of February 4, 2026, released into the public domain, Subelement G6, group G6A, question G6A05
G6A05 (C): What is the approximate forward threshold voltage of a silicon junction diode? Official answer C: 0.7 volts

Other topics on this test

Sources

NCVEC General Class Question Pool 2023-2027
Public release with 6th errata of February 4, 2026, released into the public domain

Exams are given by accredited Volunteer Examiner teams. Check the current pool and any errata on ncvec.org before your exam session. ExamVerdict is not affiliated with Federal Communications Commission (FCC), given by Volunteer Examiners. Check the official material before test day.