All tests / FAA aviation mechanic Airframe knowledge test / Electrical, instruments and communication systems
FAA aviation mechanic Airframe knowledge test: Electrical, instruments and communication systems practice
126 practice questions on Electrical, instruments and communication systems for the FAA aviation mechanic Airframe knowledge test. Each answer comes with an explanation and the official source.
Covers aircraft AC/DC generation, bus distribution, circuit breakers, wire sizing, autopilot servos, antennas, and avionics pitot-static tests.
Sample questions
What is the symbol for current in electrical measurements?
- A
- R
- E
- I (correct answer)
The symbol for current is I. Current is typically measured in amps.
The symbol for current is I and the symbol for amps is A.
What is the movement of electrons referred to as in electrical terms?
- Resistance
- Heat
- Current (correct answer)
- Voltage
This electron movement is referred to as current, flow, or current flow. Current is the movement of electrons.
Electrical current is the movement of electrons.
What is a thermocouple?
- A device that measures resistance
- A battery using alkaline electrolyte
- A junction between two different metals that produces a voltage related to a temperature difference (correct answer)
- A component that creates electromagnetic induction
A thermocouple is a junction between two different metals that produces a voltage related to a temperature difference. Thermocouples are often found on aircraft as part of a temperature monitoring system.
A thermocouple is a junction between two different metals that produces a voltage related to a temperature difference.
What is the standard unit of frequency measurement?
- Milliseconds
- Seconds
- Cycles per second
- Hz (correct answer)
The standard unit of frequency measurement is the Hz. Frequency is the number of cycles of AC per second.
The standard unit of frequency measurement is the Hz.
What is the time required for a sine wave to complete one full cycle called?
- Frequency
- Period (correct answer)
- Wavelength
- Phase
The time required for a sine wave to complete one full cycle is called a period (P). A period is typically measured in seconds, milliseconds, or microseconds.
The time required for a sine wave to complete one full cycle is called a period (P). A period is typically measured in seconds, milliseconds, or microseconds.
Other topics on this test
-
Aircraft structures, aerodynamics and rigging158 questionsPractice
-
Sheet metal, welding, wood and fabric112 questionsPractice
-
Composites, plastics and aircraft finishing117 questionsPractice
-
Hydraulics, landing gear and fuel systems138 questionsPractice
- Practice
Sources
FAA-H-8083-31B, 2023
Questions are written from FAA-H-8083-31B. Verify the current Aviation Mechanic Airframe ACS before testing. ExamVerdict is not affiliated with Federal Aviation Administration (FAA). Check the official material before test day.