ExamVerdict

All tests / FAA aviation mechanic Airframe knowledge test / Aircraft structures, aerodynamics and rigging

FAA aviation mechanic Airframe knowledge test: Aircraft structures, aerodynamics and rigging practice

158 practice questions on Aircraft structures, aerodynamics and rigging for the FAA aviation mechanic Airframe knowledge test. Each answer comes with an explanation and the official source.

Covers aircraft wood, fabric, tubular steel structures, flight control surface rigging, cable tensions, and structural alignment checks from FAA-H-8083-31B.

or practice the whole test

Sample questions

Why are the rotors of a helicopter considered part of the airframe?
  1. They are actually rotating wings (correct answer)
  2. They provide forward thrust like airplane propellers
  3. They are connected directly to the fuselage
  4. They move independently to create lift

The rotors of a helicopter are considered part of the airframe since they are actually rotating wings. Propellers and rotating airfoils of an airplane engine are not considered part of the airframe.

FAA, Aviation Maintenance Technician Handbook–Airframe (FAA-H-8083-31B), FAA-H-8083-31B, 2023, Chapters 1 and 2: Structures, aerodynamics and rigging, part 4
Note that the rotors of a helicopter are considered part of th e airframe since they are actually rotating wings.
What type of construction provided the blueprints for semimonocoque fuselage construction in early aircraft?
  1. Fabric and wood construction from early carriage making
  2. Truss-type designs from early bridge building
  3. Box beam construction from early locomotive manufacturing
  4. Hull-type construction from the shipbuilding industry (correct answer)

Early flying boats utilized hull-type construction adapted from the shipbuilding industry, which provided the blueprints for semimonocoque fuselage construction.

FAA, Aviation Maintenance Technician Handbook–Airframe (FAA-H-8083-31B), FAA-H-8083-31B, 2023, Chapters 1 and 2: Structures, aerodynamics and rigging, part 2
The early flying boats with their hull-type construction from the shipbuilding industr y provided the blueprints for semimonocoque construction of fuselages.
What material was used in the construction of the fuselage for the De Havilland Mosquito?
  1. Integrally machined copper alloy aluminum
  2. Alclad aluminum
  3. Fiberglass composite
  4. Balsa wood sandwich material (correct answer)

The De Havilland Mosquito, recognized as the first composite structure aircraft, used a balsa wood sandwich material for its fuselage construction.

FAA, Aviation Maintenance Technician Handbook–Airframe (FAA-H-8083-31B), FAA-H-8083-31B, 2023, Chapters 1 and 2: Structures, aerodynamics and rigging, part 2
The first composite structure aircraft, the De Havilland Mosquito, used a balsa wood sandwich material in the construction of the fuselage.
Why were rounded window and door openings developed for pressurized aircraft?
  1. To reduce the overall weight of the metal fuselage
  2. To provide better aerodynamic airflow at high speeds
  3. To avoid weak areas where cracks could form (correct answer)
  4. To accommodate thicker integrally machined skin panels

Rounded window and door openings were specifically developed to avoid weak areas where cracks could form due to the pressurization-depressurization cycle.

FAA, Aviation Maintenance Technician Handbook–Airframe (FAA-H-8083-31B), FAA-H-8083-31B, 2023, Chapters 1 and 2: Structures, aerodynamics and rigging, part 2
Rounded window and door openings were developed to avoid weak areas where cracks could form.
What specific material combination was initially used on items such as wing panels, flight control surfaces, and cabin floor boards?
  1. Magnesium core with plastic skin sandwich panels
  2. Carbon fiber core with titanium skin sandwich panels
  3. Aluminum core with aluminum or fiberglass skin sandwich panels (correct answer)
  4. Foam core with steel skin sandwich panels

Initially, aluminum core with aluminum or fiberglass skin sandwich panels were used on wing panels, flight control surfaces, cabin floor boards, and other applications.

FAA, Aviation Maintenance Technician Handbook–Airframe (FAA-H-8083-31B), FAA-H-8083-31B, 2023, Chapters 1 and 2: Structures, aerodynamics and rigging, part 3
Initially, aluminum core with aluminum or fiberglass skin sandwich panels were used on wing panels, flight control surfaces, cabin floor boards, and other applications.

Other topics on this test

Sources

Questions are written from FAA-H-8083-31B. Verify the current Aviation Mechanic Airframe ACS before testing. ExamVerdict is not affiliated with Federal Aviation Administration (FAA). Check the official material before test day.