All tests / FAA aviation mechanic Airframe knowledge test / Sheet metal, welding, wood and fabric
FAA aviation mechanic Airframe knowledge test: Sheet metal, welding, wood and fabric practice
112 practice questions on Sheet metal, welding, wood and fabric for the FAA aviation mechanic Airframe knowledge test. Each answer comes with an explanation and the official source.
Tests sheet metal layout, bend allowance, rivet sizing/inspection, blind fasteners, gas/TIG welding safety, and structural skin repairs.
Sample questions
What is one primary advantage of the use of fabric covering on an aircraft?
- Light weight (correct answer)
- It is highly durable
- It is not flammable
- It adheres well to the airframe
The use of fabric covering on an aircraft offers one primary advantage: light weight. Fabric coverings have two disadvantages: flammability and lack of durability.
The use of fabric covering on an aircraft offers one primary advantage: light weight. In contrast, fabric coverings have two disadvantages: flammability and lack of durability.
What was the original fabric used for covering airframes?
- Aluminum
- Irish linen and cotton (correct answer)
- Butyrate dope
- Polyester
Finely woven organic fabrics, such as Irish linen and cotton, were the original fabrics used for covering airframes. These fabrics had a tendency to sag.
Finely woven organic fabrics, such as Irish linen and cotton, were the original fabrics used for covering airframes, but their tendency to sag left the aircraft structure exposed to the elements.
When was nitrate dope introduced as an aircraft fabric coating?
- After aluminum became the material of choice
- During the early decades of production aircraft
- In the 1950s
- In 1916 (correct answer)
In 1916, a mixture of cellulose dissolved in nitric acid, called nitrate dope, came into use as an aircraft fabric coating. Nitrate dope protected the fabric and tautened it over the airframe.
In 1916, a mixture of cellulose dissolved in nitric acid, called nitrate dope, came into use as an aircraft fabric coating.
Soaking and cleaning the test strip in methyl ethyl ketone (MEK) usually removes all the coatings?
- No
- Only if the strip is new
- Sometimes
- Yes (correct answer)
Soaking and cleaning the test strip in methyl ethyl ketone (MEK) usually removes all the coatings. The fabric test strip must have all coatings removed from it for the test.
Note that the fabric test strip must have all coatings removed from it for the test. Soaking and cleaning the test strip in methyl ethyl ketone (MEK) usually removes all the coatings.
What must be approved by the FAA for items used in aircraft fabric covering and repair processes to be legally used?
- the A&P mechanic with an Inspection Authorization
- only the local FSDO
- the holder of an STC or a field approval (correct answer)
- only the manufacturer
The FAA must approve fabric, tapes, threads, cords, glues, dopes, sealants, coatings, thinners, additives, fungicides, rejuvenators, and paints. Approval must be granted for the manufacturer, the holder of an STC, or a field approval.
In order for the items to legally be used, the FAA must approve the fabric, tapes, threads, cords, glues, dopes, sealants, coatings, thinners, additives, fungicides, rejuvenators, and paints for the manufacturer, the holder of an STC, or a field approval.
Other topics on this test
-
Aircraft structures, aerodynamics and rigging158 questionsPractice
-
Composites, plastics and aircraft finishing117 questionsPractice
-
Electrical, instruments and communication systems126 questionsPractice
-
Hydraulics, landing gear and fuel systems138 questionsPractice
- Practice
Sources
FAA-H-8083-31B, 2023
Questions are written from FAA-H-8083-31B. Verify the current Aviation Mechanic Airframe ACS before testing. ExamVerdict is not affiliated with Federal Aviation Administration (FAA). Check the official material before test day.