All tests / FAA aviation mechanic Airframe knowledge test / Hydraulics, landing gear and fuel systems
FAA aviation mechanic Airframe knowledge test: Hydraulics, landing gear and fuel systems practice
138 practice questions on Hydraulics, landing gear and fuel systems for the FAA aviation mechanic Airframe knowledge test. Each answer comes with an explanation and the official source.
Examines hydraulic fluids, selector valves, oleo shock struts, anti-skid brakes, fuel boost pumps, bladders, and fuel quantity calibration.
Sample questions
What should be done with the filter element if the hydraulic system becomes contaminated?
- Removed and cleaned or replaced (correct answer)
- Flushed with clean fluid
- Replaced immediately
- Inspected for damage
If the system becomes contaminated, the filter element should be removed and cleaned or replaced.
If the system becomes contaminated, the filter element should be removed and cleaned or replaced.
What must be done to all hydraulic lines and fittings immediately after disconnecting them?
- Wiped with lint-free cloths
- Lubricated with preservative
- Capped or plugged (correct answer)
- Washed in dry-cleaning solvent
All hydraulic lines and fittings should be capped or plugged immediately after disconnecting.
All hydraulic lines and fittings should be capped or plugged immediately after disconnecting.
What are the two distinct classes of type IV fluids based on their density?
- class I fluids and class II fluids (correct answer)
- low viscosity fluids and standard viscosity fluids
- low density fluids and standard density fluids
- light density fluids and heavy density fluids
Two distinct classes of type IV fluids exist based on their density: class I fluids are low density and class II fluids are standard density. Class I fluids provide weight savings advantages versus class II.
Two distinct classes of type IV fluids exist based on their density: class I fluids are low density and class II fluids are standard density.
What is the standard of the aircraft industry for paints resistant to phosphate ester-based fluids today?
- oil-based paints
- polyurethanes (correct answer)
- epoxies
- linoleum
Today, polyurethanes are the standard of the aircraft industry because of their ability to keep a bright, shiny finish for long periods of time and for the ease with which they can be removed. Paints that are resistant to phosphate ester-based fluids include epoxies and polyurethanes.
Paints that are resistant to phosphate ester-based fluids include epoxies and polyurethanes. Today, polyurethanes are the standard of the aircraft industry because of their ability to keep a bright, shiny finish for long periods of time and for the ease with which they can be removed.
What is the rust-inhibited version of MIL-H-83282?
- Hyjet®
- MIL-H-5606
- MIL-H-46170 (correct answer)
- Skydrol®
MIL-H-46170 is the rust-inhibited version of MIL-H-83282. Small aircraft predominantly use MIL-H-5606, but some have switched to MIL-H-83282 if they can accommodate the high viscosity at low temperature.
MIL-H-46170 is the rust-inhibited version of MIL-H-83282.
Other topics on this test
-
Aircraft structures, aerodynamics and rigging158 questionsPractice
-
Sheet metal, welding, wood and fabric112 questionsPractice
-
Composites, plastics and aircraft finishing117 questionsPractice
-
Electrical, instruments and communication systems126 questionsPractice
- Practice
Sources
FAA-H-8083-31B, 2023
Questions are written from FAA-H-8083-31B. Verify the current Aviation Mechanic Airframe ACS before testing. ExamVerdict is not affiliated with Federal Aviation Administration (FAA). Check the official material before test day.