All tests / FAA aviation mechanic Airframe knowledge test
FAA aviation mechanic Airframe knowledge test practice
An FAA Airframe mechanic rating authorizes a technician to inspect, maintain, repair, and alter aircraft structures and airframe systems. Candidates must pass the Aviation Mechanic Airframe (test code AMA) computer-based knowledge test at an FAA-approved testing center.
- Test code
- AMA, Aviation Mechanic Airframe
- Questions
- 100, multiple choice
- Time
- 2 hours
- To pass
- 70%
- Minimum age
- 18 (14 CFR 65.71)
- Where
- FAA-approved knowledge testing center
- Pass mark
- 70%
- Run by
- Federal Aviation Administration (FAA)
- Practice questions here
- 787
The official AMA test contains 100 multiple-choice questions, allows 2 hours, and requires 70 percent to pass. Every practice question here is generated from the FAA Aviation Maintenance Technician Handbook – Airframe (FAA-H-8083-31B), with the source passage shown beside every answer.
Questions requiring diagrams or schematic lookups are excluded so each question can be answered independently.
What the Airframe rating covers
The Airframe rating lets a certificated mechanic maintain, repair, alter and inspect an aircraft's structure and its non-engine systems, from wings and landing gear to hydraulics, cabin pressurization and fire protection. Together with the Powerplant rating it makes up the A&P certificate most aviation maintenance jobs ask for.
To get it you pass the Aviation Mechanic Airframe (AMA) knowledge test, plus the General knowledge test (unless you already have it), and the oral and practical tests with a Designated Mechanic Examiner. Eligibility comes from 18 months of airframe experience, 30 months of combined airframe and powerplant experience, or graduation from a Part 147 maintenance school. You must be 18 to receive the certificate.
The test
AMA has 100 multiple-choice questions, a two-hour limit and a passing score of 70 percent. It is taken on a computer at an FAA-approved knowledge testing center, with an FAA Tracking Number from IACRA and government photo ID. All tests for the certificate must be completed within a 24-month period.
A hundred questions in two hours is about 72 seconds per question. That is enough if you know the material, but not if you need to work things out from scratch, so practise in timed mode.
What it covers
The test follows the Aviation Mechanic Airframe Airman Certification Standards:
- Structures: sheet metal repair, rivets and fasteners, bonded and composite structures, wood and fabric coverings, welding, painting and finishing.
- Assembly and rigging: flight control rigging, cable tension, balancing control surfaces.
- Inspection: conformity and airworthiness inspections.
- Systems: hydraulic and pneumatic power systems, landing gear and brakes, cabin atmosphere control (pressurization, heating, cooling, oxygen), aircraft instruments, communication and navigation systems, fuel systems, electrical systems, ice and rain control, fire protection systems.
Electrical systems and hydraulics carry many questions, and both need understanding rather than memory: how a system is built, how it is meant to work, and what a given symptom points to.
How to prepare
Every question here is written from the FAA's Aviation Maintenance Technician Handbook–Airframe, and each answer shows the passage it comes from. Drawing- and chart-based questions are not included, so use the FAA testing supplement for those.
A sensible order is: structures first, because it is the largest block and the most hands-on, then hydraulics and landing gear, then electrical systems, then the remaining systems. Use topic drills to bring each area above 80 percent, reading the passage for every miss. Then take full 100-question timed tests.
The same knowledge will be tested again in the oral and practical tests, where an examiner asks you to explain and demonstrate. Learning why each answer is right, not just which letter it is, pays off there.
How this practice works
Pick a mode
Untimed mode is the default. Choose timed mode to match the real clock (120 minutes), or study mode to read answers without scoring.
See the official source
After every answer you see the explanation and the exact passage or key from Federal Aviation Administration (FAA).
Review your misses
Your browser remembers your best score and missed questions locally so you can drill weak topics or practise only your mistakes.
Practice by topic
-
Aircraft structures, aerodynamics and rigging158 questionsPractice
-
Sheet metal, welding, wood and fabric112 questionsPractice
-
Composites, plastics and aircraft finishing117 questionsPractice
-
Electrical, instruments and communication systems126 questionsPractice
-
Hydraulics, landing gear and fuel systems138 questionsPractice
- Practice
Sample questions
Why are the rotors of a helicopter considered part of the airframe?
- They are actually rotating wings (correct answer)
- They provide forward thrust like airplane propellers
- They are connected directly to the fuselage
- They move independently to create lift
The rotors of a helicopter are considered part of the airframe since they are actually rotating wings. Propellers and rotating airfoils of an airplane engine are not considered part of the airframe.
Note that the rotors of a helicopter are considered part of th e airframe since they are actually rotating wings.
What type of construction provided the blueprints for semimonocoque fuselage construction in early aircraft?
- Fabric and wood construction from early carriage making
- Truss-type designs from early bridge building
- Box beam construction from early locomotive manufacturing
- Hull-type construction from the shipbuilding industry (correct answer)
Early flying boats utilized hull-type construction adapted from the shipbuilding industry, which provided the blueprints for semimonocoque fuselage construction.
The early flying boats with their hull-type construction from the shipbuilding industr y provided the blueprints for semimonocoque construction of fuselages.
What material was used in the construction of the fuselage for the De Havilland Mosquito?
- Integrally machined copper alloy aluminum
- Alclad aluminum
- Fiberglass composite
- Balsa wood sandwich material (correct answer)
The De Havilland Mosquito, recognized as the first composite structure aircraft, used a balsa wood sandwich material for its fuselage construction.
The first composite structure aircraft, the De Havilland Mosquito, used a balsa wood sandwich material in the construction of the fuselage.
Why were rounded window and door openings developed for pressurized aircraft?
- To reduce the overall weight of the metal fuselage
- To provide better aerodynamic airflow at high speeds
- To avoid weak areas where cracks could form (correct answer)
- To accommodate thicker integrally machined skin panels
Rounded window and door openings were specifically developed to avoid weak areas where cracks could form due to the pressurization-depressurization cycle.
Rounded window and door openings were developed to avoid weak areas where cracks could form.
What specific material combination was initially used on items such as wing panels, flight control surfaces, and cabin floor boards?
- Magnesium core with plastic skin sandwich panels
- Carbon fiber core with titanium skin sandwich panels
- Aluminum core with aluminum or fiberglass skin sandwich panels (correct answer)
- Foam core with steel skin sandwich panels
Initially, aluminum core with aluminum or fiberglass skin sandwich panels were used on wing panels, flight control surfaces, cabin floor boards, and other applications.
Initially, aluminum core with aluminum or fiberglass skin sandwich panels were used on wing panels, flight control surfaces, cabin floor boards, and other applications.
Related practice tests
-
FAA aviation mechanic General knowledge test 1,621 questions, pass mark 70%Practice
-
FAA aviation mechanic Powerplant knowledge test 717 questions, pass mark 70%Practice
-
FAA Commercial Pilot (CAX) knowledge test 1,045 questions, pass mark 70%Practice
Sources
FAA-H-8083-31B, 2023
Questions are written from FAA-H-8083-31B. Verify the current Aviation Mechanic Airframe ACS before testing. ExamVerdict is not affiliated with Federal Aviation Administration (FAA). Check the official material before test day.