All tests / FAA aviation mechanic Powerplant knowledge test / Reciprocating and turbine engines
FAA aviation mechanic Powerplant knowledge test: Reciprocating and turbine engines practice
108 practice questions on Reciprocating and turbine engines for the FAA aviation mechanic Powerplant knowledge test. Each answer comes with an explanation and the official source.
Tests reciprocating cylinder construction, valve timing, radial/opposed engine overhaul tolerances, and axial/centrifugal turbine engine sections.
Sample questions
One horsepower equals how many ft-lb per minute?
- 1,980,000 ft-lb per hour
- 33,000 ft-lb per minute (correct answer)
- 375 mile-pounds per hour
- 5,333.33 thp
One horsepower equals 33,000 ft-lb per minute. This is derived from the basic horsepower formula.
One horsepower equals 33,000 ft-lb per minute or 375 milepounds per hour.
What is the principal fluid used for propulsion in every type of aircraft powerplant except the rocket?
- Atmospheric air (correct answer)
- Total combustion gases
- Gaseous byproducts of combustion
- Ambient air
Atmospheric air is the principal fluid used for propulsion in every type of aircraft powerplant except the rocket. The rocket does not depend on atmospheric air.
Atmospheric air is the principal fluid used for propulsion in every type of aircraft powerplant except the rocket, in which the total combustion gases are accelerated and displaced.
Which engines accelerate a smaller quantity of air through a large velocity change?
- Turbojets, ramjets, and pulse jets (correct answer)
- Turboshaft engines
- Reciprocating piston engines
- Turboprops
Aircraft Engines Turbojets, ramjets, and pulse jets are examples of engines that accelerate a smaller quantity of air through a large velocity change. These engines use the same working fluid for propulsive force that is used within the engine.
Aircraft Engines Turbojets, ramjets, and pulse jets are examples of engines that accelerate a smaller quantity of air through a large velocity change.
What must an aircraft engine be economical in besides fuel consumption?
- Operating temperature and thrust
- Component lifespan and weight
- Cost of original procurement and maintenance (correct answer)
- Fuel flow rate and exhaust temperature
An aircraft engine must be economical in the cost of original procurement and the cost of maintenance. This is stated alongside being economical in fuel consumption.
Besides being economical in fuel consumption, an aircraft engine must be economical in the cost of original procurement and the cost of maintenance; and it must meet exacting requirements of efficiency and low weight-to-horsepower ratio.
What must an aircraft engine be capable of with no sacrifice in reliability?
- Sustained high-power output (correct answer)
- Covering a wide range of power output
- Operating at maximum altitude
- Operating for long periods between overhauls
It must be capable of sustained high-power output with no sacrifice in reliability. This requirement is listed among the general requirements for all aircraft engines.
It must be capable of sustained high-power output with no sacrifice in reliability; it must also have the durability to operate for long periods of time between overhauls.
Other topics on this test
-
Fuel metering, induction and exhaust115 questionsPractice
-
Ignition, electrical and starting systems122 questionsPractice
-
Engine lubrication and cooling systems83 questionsPractice
-
Propellers and governor systems94 questionsPractice
-
Engine installation, fire protection and maintenance195 questionsPractice
Sources
FAA-H-8083-32B, 2023
Questions are written from FAA-H-8083-32B. Check the current Aviation Mechanic Powerplant ACS before testing. ExamVerdict is not affiliated with Federal Aviation Administration (FAA). Check the official material before test day.