All tests / FAA aviation mechanic Powerplant knowledge test / Propellers and governor systems
FAA aviation mechanic Powerplant knowledge test: Propellers and governor systems practice
94 practice questions on Propellers and governor systems for the FAA aviation mechanic Powerplant knowledge test. Each answer comes with an explanation and the official source.
Covers fixed-pitch, ground-adjustable, and hydraulic constant-speed propellers, governor flyweight balance, feathering, reversing, and blade tracking.
Sample questions
On average, thrust constitutes approximately what percent of the torque?
- 100 percent
- 80 percent (correct answer)
- 20 percent
- 50 percent
On the average, thrust constitutes approximately 80 percent of the torque. The other 20 percent is lost in friction and slippage. For any speed of rotation, the horsepower absorbed by the propeller balances the horsepower delivered by the engine.
On the average, thrust constitutes approximately 80 percent of the torque (total horsepower absorbed by the propeller).
What happens to the propeller speed if the blade angle is decreased?
- it remains the same
- it slows down
- it speeds up (correct answer)
- it stops
If the blade angle is decreased, the propeller speeds up. This is due to a change in the relative wind direction, which varies with aircraft speed. Increasing propeller blade angle increases the AOA and produces more lift and drag; this action increases the horsepower required to turn the propeller at a given rpm.
If the blade angle is decreased, the propeller speeds up. Thus, the engine rpm can be controlled by increasing or decreasing the blade angle. This is due to a change in the relative wind direction, which varies with aircraft speed.
What is the imaginary line drawn through the blade from the leading edge to the trailing edge called?
- Thrust
- Angle of relative wind
- Pitch
- Chordline (correct answer)
The chordline is defined as an imaginary line drawn through the blade from the leading edge to the trailing edge. This is the standard reference line for an airfoil section of a propeller blade.
The chordline is an imaginary line drawn through the blade from the leading edge to the trailing edge.
What is the thick, rounded portion of the propeller blade near the hub called?
- Blade shank (correct answer)
- Blade butt
- Blade face
- Blade tip
The blade shank is defined as the thick, rounded portion of the propeller blade near the hub and is designed to give strength to the blade. This distinguishes it from other parts of the blade.
The blade shank is the thick, rounded portion of the propeller blade near the hub and is designed to give strength to the blade.
Which force tends to bend the propeller blades in the direction opposite that of rotation?
- Torque bending force (correct answer)
- Thrust bending force
- Centrifugal twisting force
- Aerodynamic twisting force
Torque bending force is described as the force in the form of air resistance that tends to bend the propeller blades in the direction opposite that of rotation. This is distinct from other bending forces.
Torque bending force, in the form of air resistance, tends to bend the propeller blades in the direction opposite that of rotation.
Other topics on this test
-
Reciprocating and turbine engines108 questionsPractice
-
Fuel metering, induction and exhaust115 questionsPractice
-
Ignition, electrical and starting systems122 questionsPractice
-
Engine lubrication and cooling systems83 questionsPractice
-
Engine installation, fire protection and maintenance195 questionsPractice
Sources
FAA-H-8083-32B, 2023
Questions are written from FAA-H-8083-32B. Check the current Aviation Mechanic Powerplant ACS before testing. ExamVerdict is not affiliated with Federal Aviation Administration (FAA). Check the official material before test day.