All tests / FAA aviation mechanic Powerplant knowledge test / Engine installation, fire protection and maintenance
FAA aviation mechanic Powerplant knowledge test: Engine installation, fire protection and maintenance practice
195 practice questions on Engine installation, fire protection and maintenance for the FAA aviation mechanic Powerplant knowledge test. Each answer comes with an explanation and the official source.
Tests engine firewall seals, shock mounts, Nacelle fire extinguishing agents, 100-hour powerplant inspections, and borescope checks.
Sample questions
Most engines require disconnecting and reconnecting which components to the airframe?
- Fuel lines, landing gear actuators, wing spars, and rudder cables
- Electrical, hydraulic, fuel supply, intake and exhaust air path components, engine controls, and engine mounting connections (correct answer)
- Flap tracks, aileron linkages, elevator cables, and trim tabs
- Oil lines, coolant hoses, battery cables, and ignition wires
Most engines require disconnecting and reconnecting electrical, hydraulic, fuel supply, intake and exhaust air path components, engine controls, and engine mounting connections to the airframe. This is a common task when replacing an aircraft engine.
Most engines require disconnecting and reconnecting electrical, hydraulic, fuel supply, intake and exhaust air path components, engine controls, and engine mounting connections to the airframe.
The FAA requires that the manufacture identify and establish which parts have mandatory replacement times?
- Only turbine blades
- All critical components of turbine engines
- Parts with shorter life limits due to operational stresses (correct answer)
- Only combustion liners
The FAA requires that the manufacture identify and establish which parts have mandatory replacement times. Certain critical components of turbine engines may have shorter life limits. This is due to the stresses imposed on those parts during operation.
The FAA requires that the manufacture identify and establish which parts have mandatory replacement times.
Engine sudden stoppage causes what type of engine stoppage?
- A stoppage only due to fuel starvation
- A slow and gradual engine stoppage
- A stoppage only during high power settings
- A very rapid and complete engine stoppage (correct answer)
Engine sudden stoppage causes a very rapid and complete engine stoppage. This can occur under conditions like complete and rapid collapse of the landing gear.
Engine sudden stoppage causes a very rapid and complete engine stoppage.
What must be done if damage is found that cannot be corrected by line maintenance after a sudden reduction in speed?
- Remove the engine (correct answer)
- Drain the oil into a clean container
- Inspect the engine sump plugs
- Remove the engine oil screens or filters
If damage is found that cannot be corrected by line maintenance, remove the engine. Internal components can be damaged, especially counter weights on the crankshaft. Remove the engine oil screens or filters.
If damage is found that cannot be corrected by line maintenance, remove the engine. Internal components can be damaged, especially counter weights on the crankshaft. Remove the engine oil screens or filters.
What material is the firewall usually constructed of, and what is its primary purpose?
- Titanium to withstand extreme temperatures and corrosion
- Aluminum alloy to reduce weight and improve fuel efficiency
- Stainless steel or fire-resistant material to contain fires within the engine compartment (correct answer)
- Carbon fiber to provide structural strength and heat resistance
The firewall is constructed of stainless steel or some other fire-resistant material. Its primary purpose is to contain fires within the engine compartment.
The firewall is usually the foremost bulkhead of the engine nacelle and differs from most other aircraft bulkheads in that it is constructed of stainless steel or some other fire-resistant material. The primary purpose of the firewall is to
Other topics on this test
-
Reciprocating and turbine engines108 questionsPractice
-
Fuel metering, induction and exhaust115 questionsPractice
-
Ignition, electrical and starting systems122 questionsPractice
-
Engine lubrication and cooling systems83 questionsPractice
-
Propellers and governor systems94 questionsPractice
Sources
FAA-H-8083-32B, 2023
Questions are written from FAA-H-8083-32B. Check the current Aviation Mechanic Powerplant ACS before testing. ExamVerdict is not affiliated with Federal Aviation Administration (FAA). Check the official material before test day.