ExamVerdict

All tests / FAA aviation mechanic Powerplant knowledge test / Engine lubrication and cooling systems

FAA aviation mechanic Powerplant knowledge test: Engine lubrication and cooling systems practice

83 practice questions on Engine lubrication and cooling systems for the FAA aviation mechanic Powerplant knowledge test. Each answer comes with an explanation and the official source.

Focuses on wet- and dry-sump oil systems, thermostatic bypass valves, turbine synthetic oils, cylinder cooling fins, and cowl flaps.

or practice the whole test

Sample questions

What type of friction is created when a roller or sphere rolls over another surface?
  1. Wiping friction
  2. Sliding friction
  3. Static friction
  4. Rolling friction (correct answer)

Rolling friction is created when a roller or sphere rolls over another surface, such as with ball or roller bearings.

FAA, Aviation Maintenance Technician Handbook–Powerplant (FAA-H-8083-32B), FAA-H-8083-32B, 2023, Chapter 6: Lubrication and cooling systems, part 1
Rolling friction is created when a roller or sphere rolls over another surface, such as with ball or roller bearings, also referred to as antifriction bearings.
What is the primary function of the oil film between the piston and the cylinder wall?
  1. To reduce the temperature of the spark plugs
  2. To increase engine compression
  3. To lubricate the piston rings
  4. To prevent leakage of gases from the combustion chamber (correct answer)

The oil aids in forming a seal between the piston and the cylinder wall to prevent leakage of the gases from the combustion chamber.

FAA, Aviation Maintenance Technician Handbook–Powerplant (FAA-H-8083-32B), FAA-H-8083-32B, 2023, Chapter 6: Lubrication and cooling systems, part 1
The oil also aids in forming a seal between the piston and the cylinder wall to prevent leakage of the gases from the combustion chamber.
What is the definition of oil viscosity?
  1. The capacity of oil to absorb heat
  2. The temperature at which oil turns into a solid
  3. The resistance of an oil to flow (correct answer)
  4. The ability of oil to prevent corrosion

The resistance of an oil to flow is known as its viscosity.

FAA, Aviation Maintenance Technician Handbook–Powerplant (FAA-H-8083-32B), FAA-H-8083-32B, 2023, Chapter 6: Lubrication and cooling systems, part 1
The resistance of an oil to flow is known as its viscosity.
What percentage of total engine cooling can be accounted for by oil cooling?
  1. Up to 10 percent
  2. Up to 50 percent (correct answer)
  3. Up to 75 percent
  4. Up to 25 percent

Oil cooling can account for up to 50 percent of the total engine cooling.

FAA, Aviation Maintenance Technician Handbook–Powerplant (FAA-H-8083-32B), FAA-H-8083-32B, 2023, Chapter 6: Lubrication and cooling systems, part 1
Oil cooling can account for up to 50 percent of the total engine cooling and is an excellent medium to transfer the heat from the engine to the oil cooler.
What is the lowest temperature at which the pour point of oil is reached?
  1. The temperature at which the oil begins to resist excessive thinning
  2. The temperature at which the oil begins to give off ignitable vapors
  3. The lowest temperature at which it flows or can be poured (correct answer)
  4. The temperature at which the oil appears cloudy or hazy

The pour point of oil is the lowest temperature at which it flows or can be poured. Cloud point indicates when wax content begins to solidify. Flash point relates to ignitable vapors. Specific gravity compares weight to distilled water.

FAA, Aviation Maintenance Technician Handbook–Powerplant (FAA-H-8083-32B), FAA-H-8083-32B, 2023, Chapter 6: Lubrication and cooling systems, part 3
The pour point of oil is the lowest temperature at which it flows or can be poured.

Other topics on this test

Sources

Questions are written from FAA-H-8083-32B. Check the current Aviation Mechanic Powerplant ACS before testing. ExamVerdict is not affiliated with Federal Aviation Administration (FAA). Check the official material before test day.