All tests / FCC Element 8: Ship Radar Endorsement exam
FCC Element 8: Ship Radar Endorsement exam practice test
Element 8, Ship Radar Techniques, is the written exam for the Ship Radar Endorsement that the FCC adds to a GROL or other commercial operator license. The endorsement is needed to repair, maintain and adjust ship radar equipment.
- Questions on the exam
- 50
- To pass
- 38 correct
- Question pool
- FCC pool approved June 25, 2009
- Given by
- Commercial Operator License Examination Managers (COLEMs)
- Pass mark
- 75%
- Run by
- Federal Communications Commission (FCC), given by COLEMs
- Practice questions here
- 245
The exam has 50 multiple-choice questions and you pass with 75 percent, which is 38 correct. It is given by Commercial Operator License Examination Managers (COLEMs).
The questions here are the FCC's public Element 8 pool, approved on June 25, 2009, with the official answers. Pool questions that need a drawing are not included.
What the endorsement allows
The Ship Radar Endorsement is added to an FCC commercial operator license, such as the General Radiotelephone Operator License (GROL), once you pass Element 8, Ship Radar Techniques. It is the FCC's qualification for technicians who install, service and maintain radar equipment on ships. Marine electronics companies, fleet operators and shipyards often ask for it alongside the GROL.
You must already hold, or qualify for at the same time, a GROL or another eligible commercial license; the endorsement does not stand alone.
The Element 8 exam
The exam has 50 multiple-choice questions and you pass with 75 percent, which is 38 correct. The questions come from a public FCC pool approved in 2009, still the pool used for testing. This site uses that pool with its official answers, leaving out questions that need a drawing.
The pool focuses on how marine radar works and how it fails:
- Radar principles: pulse timing, range calculation, bearing, resolution, the effect of pulse length and repetition rate.
- Transmitting systems: magnetrons, modulators, pulse-forming networks, high-voltage supplies.
- Receiving systems: mixers, local oscillators, automatic frequency control, intermediate frequencies, sensitivity time control.
- Display and timing circuits: sweep, range rings, raster and PPI displays.
- Antennas and waveguides: slotted arrays, rotating joints, waveguide handling and pressurisation.
- Installation, maintenance and repair: interference, alignment, typical faults and their symptoms, safety around high voltage and microwave radiation.
Range and timing questions come up in several forms. The key fact is that a radar pulse travels out and back, so each nautical mile of range corresponds to a fixed round-trip time, about 12.36 microseconds per nautical mile. Once you can move between time, distance and pulse rate, a whole group of questions becomes routine.
How it is given
Like the other commercial elements, Element 8 is given by Commercial Operator License Examination Managers (COLEMs), in person or online with a proctor, and each COLEM sets its own fee. After you pass, the endorsement is added to your license through an FCC Form 605 application, and the FCC's $35 issuance fee is paid in the CORES system once the application is approved. Commercial licenses and their endorsements are issued for the holder's lifetime.
How to prepare
Many candidates take Element 8 straight after the GROL, while the electronics fundamentals from Element 3 are fresh. Start with the radar principles drill, since timing, range and resolution feed into questions across the pool. Then work through the transmitter and receiver sections, which reward knowing what each stage does and what happens when it fails.
Read the explanation whenever you miss a question. The pool often asks the same idea in different words, such as a symptom, a cause or a test, and the explanation usually covers all of them. When you pass full 50-question practice tests with 42 or more correct, you are in good shape for the real exam.
For the safety questions, remember that both the high voltages inside a radar set and the microwave energy near its antenna can injure you. Those safety rules are tested, and they matter on the job too.
How this practice works
Pick a mode
Untimed mode is the default. Choose timed mode to match the real clock, or study mode to read answers without scoring.
See the official source
After every answer you see the explanation and the exact passage or key from Federal Communications Commission (FCC), given by COLEMs.
Review your misses
Your browser remembers your best score and missed questions locally so you can drill weak topics or practise only your mistakes.
Practice by topic
-
Radar Principles39 questionsPractice
-
Transmitting Systems40 questionsPractice
-
Receiving Systems46 questionsPractice
-
Display & Control Systems55 questionsPractice
-
Antenna Systems26 questionsPractice
-
Installation, Maintenance & Repair39 questionsPractice
Sample questions
Choose the most correct statement containing the parameters which control the size of the target echo.
- Transmitted power, antenna effective area, transmit and receive losses, RADAR cross section of the target, range to target. (correct answer)
- Height of antenna, power radiated, size of target, receiver gain, pulse width.
- Power radiated, antenna gain, size of target, shape of target, pulse width, receiver gain.
- Magnetron gain, antenna gain, size of target, range to target, wave-guide loss.
The official answer correctly lists the factors that determine the target echo size, which relates to the received power calculation. The other choices include irrelevant parameters like height of antenna or magnetron gain, and they omit crucial elements such as transmit and receive losses or the range to target.
8-1A1: Choose the most correct statement containing the parameters which control the size of the target echo. Official answer A: Transmitted power, antenna effective area, transmit and receive losses, RADAR cross section of the target, range to target.
Which of the following has NO effect on the maximum range capability?
- Carrier frequency.
- Recovery time. (correct answer)
- Pulse repetition frequency.
- Receiver sensitivity.
Recovery time does not influence the maximum range a system can achieve. Carrier frequency, pulse repetition frequency, and receiver sensitivity are all factors that directly impact how far a signal can be reliably detected.
8-1A2: Which of the following has NO effect on the maximum range capability? Official answer B: Recovery time.
What type of transmitter power is measured over a period of time?
- Average. (correct answer)
- Peak.
- Reciprocal.
- Return.
Average power is calculated by measuring the transmitter power over a specific duration. Peak power only measures the maximum instantaneous power, not the sustained power. Reciprocal and Return power are not standard measurements for transmitter power over time.
8-1A3: What type of transmitter power is measured over a period of time? Official answer A: Average.
What RADAR component controls timing throughout the system?
- Power supply.
- Indicator.
- Synchronizer. (correct answer)
- Receiver.
The Synchronizer is specifically designed to manage and control timing across the entire RADAR system. The Power supply provides energy, the Indicator shows status, and the Receiver processes the returning signal, none of which manage system timing.
8-1A4: What RADAR component controls timing throughout the system? Official answer C: Synchronizer.
Which of the following components allows the use of a single antenna for both transmitting and receiving?
- Mixer.
- Duplexer. (correct answer)
- Synchronizer.
- Modulator.
A duplexer is designed to allow a single antenna to handle both transmitting and receiving functions simultaneously. The Mixer, Synchronizer, and Modulator perform different signal processing tasks and do not manage the transmission/reception path on one antenna.
8-1A5: Which of the following components allows the use of a single antenna for both transmitting and receiving? Official answer B: Duplexer.
Related practice tests
-
FCC Element 1: Marine Radio Operator Permit exam 177 questions, pass mark 75%Practice
-
FCC Element 3: General Radiotelephone (GROL) exam 523 questions, pass mark 75%Practice
-
Ham radio Amateur Extra license exam 540 questions, pass mark 74%Practice
Sources
Approved June 25, 2009 (FCC public notice DA 09-1417)
Check the current pool on fcc.gov and with your COLEM before your exam. ExamVerdict is not affiliated with Federal Communications Commission (FCC), given by COLEMs. Check the official material before test day.