ExamVerdict

All tests / FCC Element 8: Ship Radar Endorsement exam / Transmitting Systems

FCC Element 8: Ship Radar Endorsement exam: Transmitting Systems practice

40 practice questions on Transmitting Systems for the FCC Element 8: Ship Radar Endorsement exam. Each answer comes with an explanation and the official source.

Covers magnetrons, modulators, pulse-forming networks, waveguides, duplexers, and rotary joints in marine radar.

or practice the whole test

Sample questions

The magnetron is used to:
  1. Generate the output signal at the proper operating frequency. (correct answer)
  2. Determine the shape and width of the transmitted pulses.
  3. Modulate the pulse signal.
  4. Determine the pulse repetition rate.

The magnetron's primary function is to produce the microwave signal at the required operating frequency. Determining pulse shape, modulating the signal, or setting the pulse repetition rate are functions of other components in the system. Therefore, generating the output signal at the proper operating frequency is the correct purpose.

FCC Commercial Element 8 Question Pool, Approved June 25, 2009 (FCC public notice DA 09-1417), Subelement B, key topic 11, question 8-11B1
8-11B1: The magnetron is used to: Official answer A: Generate the output signal at the proper operating frequency.
The purpose of the modulator is to:
  1. Transmit the high voltage pulses to the antenna.
  2. Provide high voltage pulses of the proper shape and width to the magnetron. (correct answer)
  3. Adjust the pulse repetition rate.
  4. Tune the Magnetron to the proper frequency.

The modulator's function is specifically to shape and time the high voltage pulses delivered to the magnetron. Transmitting the pulses to the antenna is the antenna's role, not the modulator's. Adjusting the repetition rate or tuning the magnetron are functions of other components in the system.

FCC Commercial Element 8 Question Pool, Approved June 25, 2009 (FCC public notice DA 09-1417), Subelement B, key topic 11, question 8-11B2
8-11B2: The purpose of the modulator is to: Official answer B: Provide high voltage pulses of the proper shape and width to the magnetron.
The purpose of the Pulse Forming Network is to:
  1. Act as a low pass filter.
  2. Act as a high pass filter.
  3. Produce a pulse of the correct width. (correct answer)
  4. Regulate the pulse repetition rate.

The Pulse Forming Network is specifically designed to shape the output into a pulse with the required duration. Acting as a low pass filter or a high pass filter does not describe its primary function. Regulating the pulse repetition rate is handled by a separate timing circuit, not the Pulse Forming Network itself.

FCC Commercial Element 8 Question Pool, Approved June 25, 2009 (FCC public notice DA 09-1417), Subelement B, key topic 11, question 8-11B4
8-11B4: The purpose of the Pulse Forming Network is to: Official answer C: Produce a pulse of the correct width.
The purpose of the Synchronizer is to:
  1. Generate the modulating pulse to the magnetron.
  2. Generate a timing signal that establishes the pulse repetition rate. (correct answer)
  3. Insure that the TR tube conducts at the proper time.
  4. Control the pulse width.

The Synchronizer's main function is to create a timing signal that sets how often the pulses occur. Generating the modulating pulse, ensuring the TR tube conducts, and controlling pulse width are functions of other components in the system. This timing signal directly dictates the pulse repetition rate.

FCC Commercial Element 8 Question Pool, Approved June 25, 2009 (FCC public notice DA 09-1417), Subelement B, key topic 11, question 8-11B5
8-11B5: The purpose of the Synchronizer is to: Official answer B: Generate a timing signal that establishes the pulse repetition rate.
High voltage is applied to what element of the magnetron?
  1. The waveguide.
  2. The anode.
  3. The plate cap.
  4. The cathode. (correct answer)

The cathode is the element to which high voltage is applied to initiate electron emission. The waveguide transmits microwave energy, the anode collects electrons, and the plate cap is a structural component, none of which receive the primary high voltage for operation.

FCC Commercial Element 8 Question Pool, Approved June 25, 2009 (FCC public notice DA 09-1417), Subelement B, key topic 12, question 8-12B1
8-12B1: High voltage is applied to what element of the magnetron? Official answer D: The cathode.

Other topics on this test

Sources

FCC Commercial Element 8 Question Pool
Approved June 25, 2009 (FCC public notice DA 09-1417)

Check the current pool on fcc.gov and with your COLEM before your exam. ExamVerdict is not affiliated with Federal Communications Commission (FCC), given by COLEMs. Check the official material before test day.