All tests / FCC Element 8: Ship Radar Endorsement exam / Display & Control Systems
FCC Element 8: Ship Radar Endorsement exam: Display & Control Systems practice
55 practice questions on Display & Control Systems for the FCC Element 8: Ship Radar Endorsement exam. Each answer comes with an explanation and the official source.
Covers PPI displays, sweep generators, ARPA tracking, gain/STC/FTC controls, and heading flasher alignment.
Sample questions
Modern liquid crystal displays have a pixel count of:
- Greater than 200 pixels per inch. (correct answer)
- Greater than 50 pixels per inch.
- Can have no more than 125 pixels per inch.
- Can implement 1,000 pixels per inch.
Modern liquid crystal displays achieve resolutions significantly higher than 200 pixels per inch. The options suggesting limits like 125 pixels per inch are outdated because technology has advanced far beyond those constraints. Furthermore, while greater than 50 pixels per inch is true, it does not reflect the current high-density capabilities of modern displays.
8-29D1: Modern liquid crystal displays have a pixel count of: Official answer A: Greater than 200 pixels per inch.
Voltages used in CRT anode circuits are in what range of value?
- 0.5-10 mV.
- 10-50 kV. (correct answer)
- 20-50 mV.
- 200-1000 V.
CRT anode circuits require very high voltages for electron acceleration, which is why the range of 10-50 kV is correct. The other options represent millivolt or kilovolt ranges that are too low for the necessary high-energy electron beam operation.
8-29D2: Voltages used in CRT anode circuits are in what range of value? Official answer B: 10-50 kV.
The purpose of the aquadag coating on the CRT is:
- To protect the electrons from strong electric fields.
- To act as a second anode.
- To attract secondary emissions from the CRT screen.
- All of the above (correct answer)
The aquadag coating serves to protect electrons, function as a second anode, and attract secondary emissions. The other choices are incomplete because the coating fulfills all three listed functions simultaneously.
8-29D3: The purpose of the aquadag coating on the CRT is: Official answer D: All of the above
LCD patterns are formed when:
- Current passes through the crystal causing them to align. (correct answer)
- When voltage is reduced to the raster scan display.
- When the deflection coils are resonant.
- When the ships antenna’s bearing is true North.
The alignment of liquid crystal molecules is directly caused by the current passing through the crystal. Reducing voltage or the deflection coils being resonant does not form LCD patterns. The ship's antenna bearing has no relation to LCD operation.
8-29D4: LCD patterns are formed when: Official answer A: Current passes through the crystal causing them to align.
In a raster-type display, the electron beam is scanned:
- From the center of the display to the outer edges.
- Horizontally and vertically across the CRT face. (correct answer)
- In a rotating pattern which follows the antenna position.
- From one specified X-Y coordinate to the next.
Raster scanning involves systematically moving the electron beam in horizontal and then vertical lines across the screen. The other options do not accurately describe the standard scanning method used in raster displays. Scanning from the center or in a rotating pattern is not how raster displays operate.
8-29D5: In a raster-type display, the electron beam is scanned: Official answer B: Horizontally and vertically across the CRT face.
Other topics on this test
-
Radar Principles39 questionsPractice
-
Transmitting Systems40 questionsPractice
-
Receiving Systems46 questionsPractice
-
Antenna Systems26 questionsPractice
-
Installation, Maintenance & Repair39 questionsPractice
Sources
Approved June 25, 2009 (FCC public notice DA 09-1417)
Check the current pool on fcc.gov and with your COLEM before your exam. ExamVerdict is not affiliated with Federal Communications Commission (FCC), given by COLEMs. Check the official material before test day.