ExamVerdict

All tests / FCC Element 8: Ship Radar Endorsement exam / Receiving Systems

FCC Element 8: Ship Radar Endorsement exam: Receiving Systems practice

46 practice questions on Receiving Systems for the FCC Element 8: Ship Radar Endorsement exam. Each answer comes with an explanation and the official source.

Focuses on mixer crystals, klystron/Gunn local oscillators, AFC circuits, IF strips, and logarithmic receivers.

or practice the whole test

Sample questions

Which of the following statements is true?
  1. The front end of the receiver does not provide any amplification to the RADAR signal. (correct answer)
  2. The mixer provides a gain of at least 6 db.
  3. The I.F. amplifier is always a high gain, narrow bandwidth amplifier.
  4. None of the above.

The front end of the receiver is designed without amplification for the initial RADAR signal to preserve its characteristics. The mixer does not guarantee a minimum gain of 6 db, and the I.F. amplifier is not always a high gain, narrow bandwidth device. Therefore, the statement about the front end is the only accurate one.

FCC Commercial Element 8 Question Pool, Approved June 25, 2009 (FCC public notice DA 09-1417), Subelement C, key topic 19, question 8-19C1
8-19C1: Which of the following statements is true? Official answer A: The front end of the receiver does not provide any amplification to the RADAR signal.
Logarithmic receivers:
  1. Can’t be damaged.
  2. Can’t be saturated. (correct answer)
  3. Should not be used in RADAR systems.
  4. Have low sensitivity.

Logarithmic receivers are designed to compress a wide dynamic range of input signals without clipping. This characteristic means they cannot become saturated by large signals. The other options are incorrect because these receivers can be damaged, and they are often used in RADAR systems due to their dynamic range capability, not because of low sensitivity.

FCC Commercial Element 8 Question Pool, Approved June 25, 2009 (FCC public notice DA 09-1417), Subelement C, key topic 19, question 8-19C2
8-19C2: Logarithmic receivers: Official answer B: Can’t be saturated.
RADAR receivers are similar to:
  1. FM receivers.
  2. HF receivers.
  3. T.V. receivers.
  4. Microwave receivers. (correct answer)

RADAR operates using microwave frequencies, making it similar to microwave receivers. FM receivers operate at much lower frequencies, and HF receivers use much lower radio frequencies. T.V. receivers also operate at different frequency bands than RADAR.

FCC Commercial Element 8 Question Pool, Approved June 25, 2009 (FCC public notice DA 09-1417), Subelement C, key topic 19, question 8-19C3
8-19C3: RADAR receivers are similar to: Official answer D: Microwave receivers.
What section of the receiving system sends signals to the display system?
  1. Video amplifier. (correct answer)
  2. Audio amplifier.
  3. I.F. Amplifier.
  4. Resolver.

The video amplifier is specifically designed to process and send signals to the display system. The audio amplifier handles sound, the I.F. Amplifier processes intermediate frequencies, and the resolver is used for angular position sensing, not display output.

FCC Commercial Element 8 Question Pool, Approved June 25, 2009 (FCC public notice DA 09-1417), Subelement C, key topic 19, question 8-19C4
8-19C4: What section of the receiving system sends signals to the display system? Official answer A: Video amplifier.
What is the main difference between an analog and a digital receiver?
  1. Special amplification circuitry.
  2. The presence of decision circuitry to distinguish between “on” and “off” signal levels. (correct answer)
  3. An AGC stage is not required in a digital receiver.
  4. Digital receivers produce no distortion.

Decision circuitry allows a digital receiver to interpret discrete signal levels as binary data, which is the fundamental difference from analog reception. The other options are not the main distinction; for example, digital receivers can still require amplification and do not produce zero distortion. An AGC stage is still often necessary in digital systems.

FCC Commercial Element 8 Question Pool, Approved June 25, 2009 (FCC public notice DA 09-1417), Subelement C, key topic 19, question 8-19C5
8-19C5: What is the main difference between an analog and a digital receiver? Official answer B: The presence of decision circuitry to distinguish between “on” and “off” signal levels.

Other topics on this test

Sources

FCC Commercial Element 8 Question Pool
Approved June 25, 2009 (FCC public notice DA 09-1417)

Check the current pool on fcc.gov and with your COLEM before your exam. ExamVerdict is not affiliated with Federal Communications Commission (FCC), given by COLEMs. Check the official material before test day.