All tests / FCC Element 8: Ship Radar Endorsement exam / Antenna Systems
FCC Element 8: Ship Radar Endorsement exam: Antenna Systems practice
26 practice questions on Antenna Systems for the FCC Element 8: Ship Radar Endorsement exam. Each answer comes with an explanation and the official source.
Tests slotted-waveguide arrays, horizontal/vertical beamwidth, rotation motors, and mast shadowing mitigation.
Sample questions
A typical shipboard RADAR antenna is a:
- Rotary parabolic transducer.
- Slotted waveguide array. (correct answer)
- Phased planar array.
- Dipole.
Slotted waveguide arrays are commonly used for shipboard RADAR because they offer a good balance of size and performance for maritime applications. A rotary parabolic transducer is too large for many ship installations, and a phased planar array is often more complex and power-intensive than necessary for typical shipboard use. A dipole is too simple to provide the necessary beam focusing for effective RADAR operation.
8-39E2: A typical shipboard RADAR antenna is a: Official answer B: Slotted waveguide array.
Good bearing resolution largely depends upon:
- A high transmitter output reading.
- A high duty cycle.
- A narrow antenna beam in the vertical plane.
- A narrow antenna beam in the horizontal plane. (correct answer)
Good bearing resolution requires a narrow antenna beam in the horizontal plane because this focuses the signal directionally. A high transmitter output reading or a high duty cycle do not directly determine angular precision. A narrow antenna beam in the vertical plane affects elevation resolution, not bearing.
8-39E3: Good bearing resolution largely depends upon: Official answer D: A narrow antenna beam in the horizontal plane.
The center of the transmitted lobe from a slotted waveguide array is:
- Several degrees offset from a line perpendicular to the antenna. (correct answer)
- Perpendicular to the antenna.
- Maximum at the right hand end.
- Maximum at the left hand end.
The center of the transmitted lobe is not perfectly perpendicular to the antenna due to the nature of the slotted waveguide array. The other options incorrectly state the lobe is perfectly perpendicular or that the maximum is located only at the ends. The slight offset is a characteristic feature of this antenna type.
8-39E4: The center of the transmitted lobe from a slotted waveguide array is: Official answer A: Several degrees offset from a line perpendicular to the antenna.
How does antenna length affect the horizontal beamwidth of the transmitted signal?
- The longer the antenna the wider the horizontal beamwidth.
- The longer the antenna the narrower the horizontal beamwidth. (correct answer)
- The horizontal beamwidth is not affected by the antenna length.
- None of the above.
A longer antenna generally results in a more focused, or narrower, horizontal beamwidth. The statement that the longer the antenna the narrower the horizontal beamwidth is correct because antenna size influences beam pattern characteristics. The other choices incorrectly suggest a wider beam or no effect from antenna length.
8-39E5: How does antenna length affect the horizontal beamwidth of the transmitted signal? Official answer B: The longer the antenna the narrower the horizontal beamwidth.
What is the most common type of RADAR antenna used aboard commercial maritime vessels?
- Parabolic.
- Truncated parabolic.
- Slotted waveguide array. (correct answer)
- Multi-element Yagi array.
Slotted waveguide arrays are the most common because they offer a good balance of gain, beamwidth, and size for maritime applications. Parabolic, truncated parabolic, and multi-element Yagi array are less practical for the diverse operational needs of commercial ships.
8-39E6: What is the most common type of RADAR antenna used aboard commercial maritime vessels? Official answer C: Slotted waveguide array.
Other topics on this test
-
Radar Principles39 questionsPractice
-
Transmitting Systems40 questionsPractice
-
Receiving Systems46 questionsPractice
-
Display & Control Systems55 questionsPractice
-
Installation, Maintenance & Repair39 questionsPractice
Sources
Approved June 25, 2009 (FCC public notice DA 09-1417)
Check the current pool on fcc.gov and with your COLEM before your exam. ExamVerdict is not affiliated with Federal Communications Commission (FCC), given by COLEMs. Check the official material before test day.