ExamVerdict

All tests / FCC Element 8: Ship Radar Endorsement exam / Installation, Maintenance & Repair

FCC Element 8: Ship Radar Endorsement exam: Installation, Maintenance & Repair practice

39 practice questions on Installation, Maintenance & Repair for the FCC Element 8: Ship Radar Endorsement exam. Each answer comes with an explanation and the official source.

Focuses on FCC ship radar repair sign-offs, performance monitor checks, radiation safety, and high-voltage servicing.

or practice the whole test

Sample questions

When you examine the RADAR you notice that there is no target video in the center of the CRT. The blank spot gets smaller in diameter as you increase the range scale. What operator front panel control could be misadjusted?
  1. TUNE.
  2. Sensitivity Time Control (STC). (correct answer)
  3. Anti-Clutter Rain (ACR).
  4. False Target Elimination (FTE).

The official answer is correct because adjusting the Sensitivity Time Control directly affects the size of the blank spot in the center of the CRT. Increasing the range scale should cause the blank spot to shrink, which is the expected behavior when STC is misadjusted. TUNE, Anti-Clutter Rain, and False Target Elimination do not control the size of the central blank spot based on range scale changes.

FCC Commercial Element 8 Question Pool, Approved June 25, 2009 (FCC public notice DA 09-1417), Subelement F, key topic 44, question 8-44F1
8-44F1: When you examine the RADAR you notice that there is no target video in the center of the CRT. The blank spot gets smaller in diameter as you increase the range scale. What operator front panel control could be misadjusted? Official answer B: Sensitivity Time Control (STC).
Range rings on the PPI indicator are oval in shape. Which circuit would you suspect is faulty?
  1. Timing circuit.
  2. Video amplifier circuit.
  3. Range marker circuit.
  4. Sweep generation circuit. (correct answer)

The range rings on the PPI indicator are created by the sweep generation circuit. The timing circuit controls the sweep speed, not the shape of the rings. The video amplifier circuit and range marker circuit do not determine the physical shape of the range rings.

FCC Commercial Element 8 Question Pool, Approved June 25, 2009 (FCC public notice DA 09-1417), Subelement F, key topic 44, question 8-44F2
8-44F2: Range rings on the PPI indicator are oval in shape. Which circuit would you suspect is faulty? Official answer D: Sweep generation circuit.
What would be the most likely defective area when there is no target video in the center of the CRT and the blank spot gets smaller in diameter as your range scale is increased?
  1. The TR (TRL) Cell. (correct answer)
  2. The local oscillator is misadjusted.
  3. Video amplifier circuit.
  4. The IF amplifier circuit.

The TR (TRL) Cell is responsible for image formation, and a shrinking blank spot with increased range indicates an issue there. The local oscillator is misadjusted, video amplifier circuit, and IF amplifier circuit do not cause this specific symptom pattern.

FCC Commercial Element 8 Question Pool, Approved June 25, 2009 (FCC public notice DA 09-1417), Subelement F, key topic 44, question 8-44F3
8-44F3: What would be the most likely defective area when there is no target video in the center of the CRT and the blank spot gets smaller in diameter as your range scale is increased? Official answer A: The TR (TRL) Cell.
While the vessel is docked the presentation of the pier is distorted near the center of the PPI with the pier appearing to bend in a concave fashion. This is a primary indication of what?
  1. The deflection coils need adjusting.
  2. The centering magnets at the CRT neck need adjusting.
  3. The waveguide compensation delay line needs adjusting. (correct answer)
  4. The CRT filaments are weakening.

The concave bending of the pier near the center of the PPI indicates a timing error in the image display. Adjusting the waveguide compensation delay line corrects this timing issue. The other options address filament strength, coil alignment, or general centering, none of which cause this specific image distortion.

FCC Commercial Element 8 Question Pool, Approved June 25, 2009 (FCC public notice DA 09-1417), Subelement F, key topic 44, question 8-44F4
8-44F4: While the vessel is docked the presentation of the pier is distorted near the center of the PPI with the pier appearing to bend in a concave fashion. This is a primary indication of what? Official answer C: The waveguide compensation delay line needs adjusting.
In a RADAR using digital video processing, a bright, wide ring appears at a fixed distance from the center of the display on all digital ranges. The transmitter is operating normally. What receiver circuit would you suspect is causing the problem?
  1. VRM circuit.
  2. Video storage RAM or shift register. (correct answer)
  3. Range ring generator.
  4. EBL circuit.

The Video storage RAM or shift register is responsible for holding and displaying range data, so a fault here would cause a fixed, bright ring across all digital ranges. The Range ring generator creates the visual reference, not the data display itself. The VRM circuit and EBL circuit handle power and display brightness, not range data integrity.

FCC Commercial Element 8 Question Pool, Approved June 25, 2009 (FCC public notice DA 09-1417), Subelement F, key topic 44, question 8-44F5
8-44F5: In a RADAR using digital video processing, a bright, wide ring appears at a fixed distance from the center of the display on all digital ranges. The transmitter is operating normally. What receiver circuit would you suspect is causing the problem? Official answer B: Video storage RAM or shift register.

Other topics on this test

Sources

FCC Commercial Element 8 Question Pool
Approved June 25, 2009 (FCC public notice DA 09-1417)

Check the current pool on fcc.gov and with your COLEM before your exam. ExamVerdict is not affiliated with Federal Communications Commission (FCC), given by COLEMs. Check the official material before test day.