All tests / Ham radio Technician license exam / Antennas and Feed Lines
Ham radio Technician license exam: Antennas and Feed Lines practice
23 practice questions on Antennas and Feed Lines for the Ham radio Technician license exam. Each answer comes with an explanation and the official source.
Focuses on half-wave dipoles, quarter-wave verticals, coax impedance, connectors, SWR limits, and directional gain antennas.
Sample questions
What is a beam antenna?
- An antenna built from square aluminum beams
- An omnidirectional antenna invented by Clarence Beam
- An antenna that concentrates signals in one direction (correct answer)
- An antenna that focuses the signal into two intense rays
A beam antenna is designed to concentrate radio frequency energy in a specific direction, gaining higher gain and directivity compared to omnidirectional antennas. The choice suggesting it is built from square aluminum beams and the choice mentioning Clarence Beam are incorrect fabrications. Similarly, the choice about focusing the signal into two intense rays does not describe the directional concentration characteristic of a standard beam antenna.
T9A01 (C): What is a beam antenna? Official answer C: An antenna that concentrates signals in one direction
Which of the following describes a type of antenna loading?
- Electrically lengthening by inserting inductors in radiating elements (correct answer)
- Inserting a resistor in the radiating portion of the antenna to make it resonant
- Installing a spring in the base of a mobile vertical antenna to make it more flexible
- Strengthening the radiating elements of a beam antenna to better resist wind damage
Antenna loading involves adding electrical components to modify the resonant frequency of an antenna that is physically shorter than required for the operating wavelength. Inserting inductors into the radiating elements adds inductive reactance, which electrically lengthens the antenna. The other choices involve mechanical modifications or adding resistance, which do not achieve electrical lengthening.
T9A02 (A): Which of the following describes a type of antenna loading? Official answer A: Electrically lengthening by inserting inductors in radiating elements
How is the polarization of an antenna described?
- By the shape of the driven element
- By the orientation of the electric field (correct answer)
- By the orientation of the magnetic field
- By the direction of radiation
The polarization of an antenna is defined by the spatial orientation of the electric field vector radiated by the antenna. The magnetic field orientation and the direction of radiation do not determine polarization, and the shape of the driven element is irrelevant to this definition.
T9A03 (B): How is the polarization of an antenna described? Official answer B: By the orientation of the electric field
What is a disadvantage of a handheld radio transceiver’s short flexible antenna compared to a full-sized quarter-wave antenna?
- It has low efficiency (correct answer)
- It transmits only circularly polarized signals
- It is more susceptible to receiver desensitization
- It only works on analog signals, not digital ones
A handheld radio's short flexible antenna, often called a "rubber duck," is physically much shorter than a resonant quarter-wavelength, which significantly reduces its radiation efficiency compared to a full-sized antenna. The other choices are incorrect because short antennas do not inherently cause receiver desensitization, restrict transmission to circular polarization, or limit operation exclusively to analog signals.
T9A04 (A): What is a disadvantage of a handheld radio transceiver’s short flexible antenna compared to a full-sized quarter-wave antenna? Official answer A: It has low efficiency
Which of the following increases the resonant frequency of a dipole antenna?
- Lengthening it
- Inserting coils in series with radiating wires
- Shortening it (correct answer)
- Adding capacitive loading to the ends of the radiating wires
The resonant frequency of a dipole antenna is inversely proportional to its physical length, meaning that making the antenna shorter increases its resonant frequency. Conversely, lengthening the antenna, inserting series loading coils, or adding capacitive loading all decrease the resonant frequency by increasing the electrical length.
T9A05 (C): Which of the following increases the resonant frequency of a dipole antenna? Official answer C: Shortening it
Other topics on this test
-
Commission's Rules68 questionsPractice
-
Operating Procedures37 questionsPractice
-
Radio Wave Propagation35 questionsPractice
-
Amateur Radio Practices22 questionsPractice
-
Electrical Principles48 questionsPractice
-
Electronic and Electrical Components34 questionsPractice
-
Practical Circuits43 questionsPractice
-
Signals and Emissions46 questionsPractice
-
Safety35 questionsPractice
Sources
Public release with errata of February 19, 2026, released into the public domain
Current text, retrieved November 16, 2026
Exams are given by accredited Volunteer Examiner teams. Check the current pool and any errata on ncvec.org before your exam session. ExamVerdict is not affiliated with Federal Communications Commission (FCC), given by Volunteer Examiners. Check the official material before test day.