ExamVerdict

All tests / Ham radio Technician license exam / Operating Procedures

Ham radio Technician license exam: Operating Procedures practice

37 practice questions on Operating Procedures for the Ham radio Technician license exam. Each answer comes with an explanation and the official source.

Covers on-air etiquette, band plans, repeater coordination, emergency communications, and contest or digital operating standards for entry-level amateur operators.

or practice the whole test

Sample questions

What is a common repeater frequency offset in the 2-meter band?
  1. Plus or minus 5 MHz
  2. Plus or minus 600 kHz (correct answer)
  3. Plus or minus 500 kHz
  4. Plus or minus 1 MHz

The standard common repeater frequency offset in the 2-meter band is plus or minus 600 kHz. Plus or minus 5 MHz, plus or minus 500 kHz, and plus or minus 1 MHz are not the established operational offsets for this band.

NCVEC Technician Class Question Pool 2026-2030, Public release with errata of February 19, 2026, released into the public domain, Subelement T2, group T2A, question T2A01
T2A01 (B): What is a common repeater frequency offset in the 2-meter band? Official answer B: Plus or minus 600 kHz
What is the national calling frequency for FM simplex operations in the 2-meter band?
  1. 146.520 MHz (correct answer)
  2. 145.000 MHz
  3. 432.100 MHz
  4. 446.000 MHz

146.520 MHz is the designated national calling frequency for FM simplex operations in the 2-meter band. The other frequencies listed are reserved for different uses, such as general amateur radio or specific digital modes, not the national calling frequency.

NCVEC Technician Class Question Pool 2026-2030, Public release with errata of February 19, 2026, released into the public domain, Subelement T2, group T2A, question T2A02
T2A02 (A): What is the national calling frequency for FM simplex operations in the 2-meter band? Official answer A: 146.520 MHz
What is a common repeater frequency offset in the 70-centimeter band?
  1. Plus or minus 5 MHz (correct answer)
  2. Plus or minus 600 kHz
  3. Plus or minus 500 kHz
  4. Plus or minus 1 MHz

The common repeater frequency offset in the 70-centimeter band is plus or minus 5 MHz. The other options, plus or minus 600 kHz, plus or minus 500 kHz, and plus or minus 1 MHz, do not represent the standard offset used in this frequency band.

NCVEC Technician Class Question Pool 2026-2030, Public release with errata of February 19, 2026, released into the public domain, Subelement T2, group T2A, question T2A03
T2A03 (A): What is a common repeater frequency offset in the 70-centimeter band? Official answer A: Plus or minus 5 MHz
What is an appropriate way to call another station on a repeater if you know the other station's call sign?
  1. Say "break, break," then the other station’s call sign, followed by your call sign
  2. Say the station's call sign, then identify with your call sign (correct answer)
  3. Say "CQ" three times, then the other station's call sign, followed by your call sign
  4. Wait for the station to call CQ, then answer with your call sign

Directly calling the station's call sign followed by your own is the standard procedure for making a specific contact. Saying "break, break," then the other station’s call sign, followed by your call sign is unnecessarily disruptive. Saying "CQ" three times is used to solicit any station, not to contact a known station. Waiting for the station to call CQ is not appropriate when you know their call sign.

NCVEC Technician Class Question Pool 2026-2030, Public release with errata of February 19, 2026, released into the public domain, Subelement T2, group T2A, question T2A04
T2A04 (B): What is an appropriate way to call another station on a repeater if you know the other station's call sign? Official answer B: Say the station's call sign, then identify with your call sign
How should you respond to a station calling CQ?
  1. Transmit "CQ" followed by the other station’s call sign
  2. Transmit your call sign followed by the other station’s call sign
  3. Transmit the other station’s call sign followed by your call sign (correct answer)
  4. Transmit a signal report followed by your call sign

When answering a CQ call, standard amateur radio operating procedure requires you to transmit the call sign of the station you are calling first, followed by your own call sign to identify who is responding. The other choices are incorrect because they either repeat the CQ call improperly, reverse the proper order of call signs, or prematurely send a signal report before communication is established.

NCVEC Technician Class Question Pool 2026-2030, Public release with errata of February 19, 2026, released into the public domain, Subelement T2, group T2A, question T2A05
T2A05 (C): How should you respond to a station calling CQ? Official answer C: Transmit the other station’s call sign followed by your call sign

Other topics on this test

Sources

NCVEC Technician Class Question Pool 2026-2030
Public release with errata of February 19, 2026, released into the public domain

Exams are given by accredited Volunteer Examiner teams. Check the current pool and any errata on ncvec.org before your exam session. ExamVerdict is not affiliated with Federal Communications Commission (FCC), given by Volunteer Examiners. Check the official material before test day.