ExamVerdict

All tests / Ham radio Technician license exam / Practical Circuits

Ham radio Technician license exam: Practical Circuits practice

43 practice questions on Practical Circuits for the Ham radio Technician license exam. Each answer comes with an explanation and the official source.

Examines schematic reading, oscillators, filters, amplifiers, modulators, and transceiver block diagrams at the Technician license level.

or practice the whole test

Sample questions

Which term describes the ability of a receiver to detect the presence of a signal?
  1. RF gain
  2. Sensitivity (correct answer)
  3. Selectivity
  4. Total Harmonic Distortion

Sensitivity specifically measures a receiver's ability to detect weak signals. RF gain increases signal strength but doesn't define detection capability. Selectivity describes a receiver's ability to reject unwanted signals, and Total Harmonic Distortion measures signal quality, not detection ability.

NCVEC Technician Class Question Pool 2026-2030, Public release with errata of February 19, 2026, released into the public domain, Subelement T7, group T7A, question T7A01
T7A01 (B): Which term describes the ability of a receiver to detect the presence of a signal? Official answer B: Sensitivity
What is a transceiver?
  1. A device that combines a receiver and transmitter (correct answer)
  2. A device for matching feed line impedance to 50 ohms
  3. A device for automatically sending and decoding Morse code
  4. A device for converting receiver and transmitter frequencies to another band

A transceiver is correctly defined as a device that combines both a receiver and a transmitter. The other options describe impedance matching, Morse code decoding, or frequency conversion, which are separate functions not defining a transceiver.

NCVEC Technician Class Question Pool 2026-2030, Public release with errata of February 19, 2026, released into the public domain, Subelement T7, group T7A, question T7A02
T7A02 (A): What is a transceiver? Official answer A: A device that combines a receiver and transmitter
Which of the following is used to convert a signal from one frequency to another?
  1. Phase splitter
  2. Mixer (correct answer)
  3. Inverter
  4. Amplifier

A mixer is specifically designed to change a signal's frequency by combining it with another signal. A phase splitter divides a signal, an inverter flips the signal's phase, and an amplifier increases signal strength without changing the frequency.

NCVEC Technician Class Question Pool 2026-2030, Public release with errata of February 19, 2026, released into the public domain, Subelement T7, group T7A, question T7A03
T7A03 (B): Which of the following is used to convert a signal from one frequency to another? Official answer B: Mixer
Which term describes the ability of a receiver to discriminate between multiple signals?
  1. Discrimination ratio
  2. Sensitivity
  3. Selectivity (correct answer)
  4. Harmonic distortion

Selectivity specifically describes a receiver's ability to distinguish between several different signals. Discrimination ratio is a measure of signal separation, while sensitivity refers to how well a receiver detects a signal. Harmonic distortion relates to signal purity, not signal discrimination.

NCVEC Technician Class Question Pool 2026-2030, Public release with errata of February 19, 2026, released into the public domain, Subelement T7, group T7A, question T7A04
T7A04 (C): Which term describes the ability of a receiver to discriminate between multiple signals? Official answer C: Selectivity
What is the name of a circuit that generates a signal at a specific frequency?
  1. Reactance modulator
  2. Phase modulator
  3. Low-pass filter
  4. Oscillator (correct answer)

An oscillator is specifically designed to generate a signal at a precise, repetitive frequency. A reactance modulator, phase modulator, and low-pass filter perform different signal processing functions rather than generating a specific frequency signal.

NCVEC Technician Class Question Pool 2026-2030, Public release with errata of February 19, 2026, released into the public domain, Subelement T7, group T7A, question T7A05
T7A05 (D): What is the name of a circuit that generates a signal at a specific frequency? Official answer D: Oscillator

Other topics on this test

Sources

NCVEC Technician Class Question Pool 2026-2030
Public release with errata of February 19, 2026, released into the public domain

Exams are given by accredited Volunteer Examiner teams. Check the current pool and any errata on ncvec.org before your exam session. ExamVerdict is not affiliated with Federal Communications Commission (FCC), given by Volunteer Examiners. Check the official material before test day.