All tests / OSHA construction safety practice test / Stairways and ladders (Subpart X)
OSHA construction safety practice test: Stairways and ladders (Subpart X) practice
32 practice questions on Stairways and ladders (Subpart X) for the OSHA construction safety practice test. Each answer comes with an explanation and the official source.
Focuses on 29 CFR 1926 Subpart X ladder 3-foot extension, 4:1 pitch angle, non-conductive side rails, and stairway landing guards.
Sample questions
What does equivalent mean in the context of OSHA construction safety standards?
- A self-supporting portable ladder, adjustable in length, consisting of a trestle ladder base and a vertically adjustable extension section.
- Alternative designs, materials, or methods that the employer can demonstrate will provide an equal or greater degree of safety for employees than the method or item specified in the standard. (correct answer)
- A method that is commercially manufactured and not fabricated by employees at the construction site.
- A ladder that requires a person getting off at the top to step between the side rails of the ladder to reach the landing.
Equivalent means alternative designs, materials, or methods that the employer can demonstrate will provide an equal or greater degree of safety for employees than the method or item specified in the standard.
Equivalent means alternative designs, materials, or methods that the employer can demonstrate will provide an equal or greater degree of safety for employees than the method or item specified in the standard.
What is the minimum riser height variation allowed in a stairway system?
- 1/4-inch (0.6 cm) (correct answer)
- 1/2-inch (1.3 cm)
- 1/8-inch (0.3 cm)
- 1 inch (2.5 cm)
OSHA requires that variations in riser height or tread depth shall not exceed 1/4-inch (0.6 cm) in any stairway system.
Variations in riser height or tread depth shall not be over 1/4-inch (0.6 cm) in any stairway system.
At what angle range must stairs be installed according to OSHA construction standards?
- 45° to 60° from horizontal
- 20° to 40° from horizontal
- 15° to 30° from horizontal
- 30° to 50° from horizontal (correct answer)
OSHA requires stairs to be installed between 30° and 50° from horizontal.
Stairs shall be installed between 30° and 50° from horizontal.
What is the minimum width requirement for a door platform when a door opens directly on a stairway?
- 22 inches (56 cm)
- 24 inches (61 cm)
- 18 inches (46 cm)
- 20 inches (51 cm) (correct answer)
When doors or gates open directly on a stairway, a platform shall be provided with the swing of the door not reducing the effective width to less than 20 inches (51 cm).
Where doors or gates open directly on a stairway, a platform shall be provided, and the swing of the door shall not reduce the effective width of the platform to less than 20 inches (51 cm).
Ladders placed in passageways, doorways, or driveways shall be secured or barricaded to prevent accidental displacement?
- secured to prevent accidental displacement (correct answer)
- inspected by a competent person for visible defects
- placed with the two rails supported equally
- moved, shifted, or extended while occupied
Ladders placed in any location where they can be displaced by workplace activities or traffic, such as in passageways, doorways, or driveways, shall be secured to prevent accidental displacement, or a barricade shall be used to keep the activities or traffic away from the ladder.
(8) Ladders placed in any location where they can be displaced by workplace activities or traffic, such as in passageways, doorways, or driveways, shall be secured to prevent accidental displacement, or a barricade shall be used to keep the activities or traffic away from the ladder.
Other topics on this test
-
Fall protection (Subpart M)30 questionsPractice
-
Scaffolds (Subpart L)55 questionsPractice
-
Excavations and trenching (Subpart P)51 questionsPractice
-
Electrical safety (Subpart K)45 questionsPractice
-
General safety, PPE and fire protection52 questionsPractice
Sources
Current text, retrieved November 16, 2026
This is an independent OSHA construction safety practice test based on 29 CFR Part 1926, not an official OSHA Outreach certification. ExamVerdict is not affiliated with Occupational Safety and Health Administration (OSHA). Check the official material before test day.