All tests / FAA aviation mechanic General knowledge test
FAA aviation mechanic General knowledge test practice
An FAA mechanic certificate with Airframe and Powerplant (A&P) ratings starts with three knowledge tests: General (test code AMG), Airframe and Powerplant. The General test covers what both ratings share: safety and ground operations, regulations and maintenance records, physics, weight and balance, materials and hardware, cleaning and corrosion control, fluid lines, inspection, tools, electricity and human factors.
- Test code
- AMG, Aviation Mechanic General
- Based on
- FAA-H-8083-30B handbook
- To pass
- 70%
- Where
- FAA-approved knowledge testing center
- Pass mark
- 70%
- Run by
- Federal Aviation Administration (FAA)
- Practice questions here
- 1,621
The test is taken on a computer at an FAA-approved testing center, and the passing score is 70 percent. Every practice question here is written from the FAA Aviation Maintenance Technician Handbook–General (FAA-H-8083-30B), and each answer shows the passage it rests on.
Questions that need a figure or a calculation from a chart are not included.
The first of three mechanic tests
An FAA mechanic certificate with Airframe and Powerplant ratings, the A&P, is the license that lets a technician maintain, repair and return aircraft to service. To earn it you pass three knowledge tests, General (AMG), Airframe (AMA) and Powerplant (AMP), followed by oral and practical tests with a Designated Mechanic Examiner (DME).
General covers the knowledge both ratings share, which is why most students take it first.
Who can take it
Under 14 CFR 65.77 you qualify through either:
- Experience: at least 18 months of practical experience with the procedures, practices, materials, tools and equipment for one rating, or 30 months working on both airframes and powerplants at the same time; or
- Training: graduation from an FAA-certificated Aviation Maintenance Technician School (Part 147).
Experience applicants have their eligibility reviewed by the FAA, which gives the authorization to test. School graduates use their school's documentation. You must be at least 18 to receive the certificate, and you must read, write, speak and understand English.
The test
AMG has 60 multiple-choice questions, a two-hour limit and a passing score of 70 percent. It is taken on a computer at an FAA-approved knowledge testing center, with an FAA Tracking Number from IACRA and government photo ID.
All the tests for the certificate, knowledge, oral and practical, must be completed within a 24-month period. Plan the sequence so your General result does not expire before you finish the other tests.
What it covers
The test follows the Aviation Mechanic General Airman Certification Standards:
- Fundamentals of electricity and electronics: Ohm's law, AC and DC circuits, batteries, meters, wiring diagrams.
- Aircraft drawings: blueprints, schematics, symbols and dimensions.
- Weight and balance: weighing an aircraft, empty weight center of gravity, adding and removing equipment.
- Fluid lines and fittings: rigid and flexible lines, fittings, identification.
- Materials and processes: metals and composites, heat treatment, hardware, safety wire, torque, non-destructive testing.
- Ground operations and servicing: towing, tie-down, fueling, starting engines, fire safety.
- Cleaning and corrosion control: types of corrosion, detection, treatment and prevention.
- Mathematics and physics: the math and physics a mechanic uses daily.
- Maintenance forms and records: what must be recorded and by whom, return to service, the regulations in 14 CFR Parts 43 and 91.
- Publications: service manuals, airworthiness directives, type certificate data sheets.
- Mechanic privileges and limitations: what you may and may not do under Part 65.
- Human factors: the "dirty dozen" causes of maintenance error and how to manage them.
How to prepare
Every practice question here is written from the FAA's Aviation Maintenance Technician Handbook–General, and each answer shows the passage it comes from. Questions that need a drawing or a chart are not included, so practise those with the FAA's testing supplement.
Most students find three areas hardest: electricity, weight and balance, and the maintenance records rules. Spend extra time there, because they also come back in the oral and practical tests.
A good routine is a short topic drill every day rather than a long session once a week. When you pass full 60-question practice tests with 85 percent or more, you are ready to book. Then move straight on to Airframe or Powerplant while the shared material is fresh.
How this practice works
Pick a mode
Untimed mode is the default. Choose timed mode to match the real clock (120 minutes), or study mode to read answers without scoring.
See the official source
After every answer you see the explanation and the exact passage or key from Federal Aviation Administration (FAA).
Review your misses
Your browser remembers your best score and missed questions locally so you can drill weak topics or practise only your mistakes.
Practice by topic
-
Safety, ground operations and servicing95 questionsPractice
- Practice
-
Physics for aviation183 questionsPractice
-
Aircraft weight and balance98 questionsPractice
-
Aircraft materials, processes and hardware249 questionsPractice
-
Cleaning and corrosion121 questionsPractice
-
Fluid lines and fittings48 questionsPractice
-
Inspection concepts and techniques103 questionsPractice
-
Hand tools, measuring devices and electricity520 questionsPractice
-
Human factors82 questionsPractice
Sample questions
Halogenated hydrocarbon extinguishers are most effective on which classes of fires?
- Class A and C fires
- Class B and C fires (correct answer)
- Class A and D fires
- Class D and E fires
Halogenated hydrocarbon extinguishers are most effective on Class B and C fires. They can be used on Class A and D fires, but they are less effective.
Halogenated hydrocarbon extinguishers are most effective on Class B and C fires. They can be used on Class A and D fires, but they are less effective.
The Supplemental Type Certificate certifies that a change in the type design meets the airworthiness requirements of which Federal Aviation Regulations part?
- Part 21 of the Federal Aviation Regulations
- Part 43 of the Federal Aviation Regulations
- Part 121 of the Federal Aviation Regulations
- Part 23 of the Federal Aviation Regulations (correct answer)
This Certificate issued to Commander Premier Aircraft Corporation certifies that the change in the type design for the following product with the limitations and conditions therefor as specified hereon meets the airworthiness requirements of Part 23 of the Federal Aviation Regulations.
certifies that the change in the type design for the following product with the limitations and conditions therefor as specified hereon meets the airworthiness requirements of Part 23 of the Federal Aviation Regulations.
The Supplemental Type Certificate for the Commander Model 114 airplane involved the installation of which propeller?
- Steel Propeller
- McCauley B3D32C419/82NHA-5 Propeller (correct answer)
- Standard Propeller
- Aluminum Propeller
Description of Type Design Change: Installation of McCauley B3D32C419/82NHA-5 Propeller on Commander Model 114 airplane in accordance with Commander Aircraft Co., Installation Instructions dated July 13, 1990, Revision A dated August 22, 1990, or later FAA approved revision.
Description of Type Design Change: Installation of McCauley B3D32C419/82NHA-5 Propeller on Commander Model 114 airplane in accordance with Commander Aircraft Co., Installation Instructions dated July 13, 1990, Revision A dated August 22, 1990, or later FAA approved revision.
Alloys 122, A132, and 142 are commonly used in permanent mold castings for what principal uses?
- Structural beams
- Aircraft wing structures
- Internal combustion engines (correct answer)
- Automotive chassis
Alloys 122, A132, and 142 are commonly used in permanent mold castings in internal combustion engines. Permanent mold castings are used to obtain higher mechanical properties, better surfaces, or more accurate dimensions. Finer grain structure is produced in alloys subjected to the rapid cooling of metal molds.
Alloys 122, A132, and 142 are commonly used in permanent mold castings, the principal uses of which are in internal combustion engines.
Magnesium alloy is used in die-castings when what is of primary importance?
- Corrosion resistance
- Ease of production
- Weight (correct answer)
- Strength
Die-castings used in aircraft are usually aluminum or magnesium alloy. If weight is of primary importance, magnesium alloy is used, because it is lighter than aluminum alloy. Aluminum alloy is frequently used because it is stronger than most magnesium alloys.
Die-castings used in aircraft are usually aluminum or magnesium alloy. If weight is of primary importance, magnesium alloy is used, because it is lighter than aluminum alloy.
Related practice tests
-
FAA aviation mechanic Airframe knowledge test 787 questions, pass mark 70%Practice
-
FAA aviation mechanic Powerplant knowledge test 717 questions, pass mark 70%Practice
-
FAA Commercial Pilot (CAX) knowledge test 1,045 questions, pass mark 70%Practice
Sources
FAA-H-8083-30B, 2023
Questions are written from the FAA handbook. Check the current Aviation Mechanic General ACS and testing matrix before your test. ExamVerdict is not affiliated with Federal Aviation Administration (FAA). Check the official material before test day.