All tests / FAA aviation mechanic General knowledge test / Cleaning and corrosion
FAA aviation mechanic General knowledge test: Cleaning and corrosion practice
121 practice questions on Cleaning and corrosion for the FAA aviation mechanic General knowledge test. Each answer comes with an explanation and the official source.
Covers galvanic/intergranular/filiform corrosion forms, treatment chemicals, alodine conversion, and non-corrosive cleaners.
Sample questions
What is the most widely used technique for the detection and evaluation of corrosion?
- Eddy current inspection
- Ultrasonic inspection
- Liquid penetrant inspection
- Visual inspection (correct answer)
Visual inspection is the most widely used technique and is an effective method for the detection and evaluation of corrosion.
Visual inspection is the most widely used technique and is an effective method for the detection and evaluation of corrosion.
What type of equipment requires proper calibration each time it is used to obtain reliable results for corrosion inspection?
- Optical micrometers and depth gauges
- Flashlights and magnifying glasses
- Mirrors and borescopes
- Eddy current, x-ray, and ultrasonic inspection methods (correct answer)
Eddy current, x-ray, and ultrasonic inspection methods require properly calibrated equipment each time they are used.
Eddy current, x-ray, and ultrasonic inspection methods require properly calibrated (each time used) equipment and a controlling reference standard to obtain reliable results.
What must all corrosion inspections start with?
- Applying a corrosion inhibitor
- A detailed inspection of damage
- A thorough cleaning of the area to be inspected (correct answer)
- Removing access panels
All corrosion inspections must begin with a thorough cleaning of the area that is going to be inspected.
All corrosion inspections start with a thorough cleaning of the area to be inspected.
Who is permitted to perform NDI methods for the detection of corrosion?
- Only qualified and certified NDI personnel (correct answer)
- Any licensed airframe mechanic
- Only aircraft owners
- Any flight crew member
NDI methods have limitations and must be performed exclusively by qualified and certified NDI personnel.
These methods have limitations and must be performed only by qualified and certified NDI personnel.
What effect does leakage from aircraft batteries using sulfuric acid or potassium hydroxide have?
- It removes protective coatings.
- It creates an electrical short.
- It causes corrosion. (correct answer)
- It neutralizes acid deposits.
If aircraft batteries with electrolytes, sulfuric acid, or potassium hydroxide are in use, their leakage will cause corrosion.
If aircraft batteries with electrolytes, sulfuric acid, or potassium hydroxide are in use, their leakage will cause corrosion.
Other topics on this test
-
Safety, ground operations and servicing95 questionsPractice
- Practice
-
Physics for aviation183 questionsPractice
-
Aircraft weight and balance98 questionsPractice
-
Aircraft materials, processes and hardware249 questionsPractice
-
Fluid lines and fittings48 questionsPractice
-
Inspection concepts and techniques103 questionsPractice
-
Hand tools, measuring devices and electricity520 questionsPractice
-
Human factors82 questionsPractice
Sources
FAA-H-8083-30B, 2023
Questions are written from the FAA handbook. Check the current Aviation Mechanic General ACS and testing matrix before your test. ExamVerdict is not affiliated with Federal Aviation Administration (FAA). Check the official material before test day.