All tests / FAA aviation mechanic General knowledge test / Physics for aviation
FAA aviation mechanic General knowledge test: Physics for aviation practice
183 practice questions on Physics for aviation for the FAA aviation mechanic General knowledge test. Each answer comes with an explanation and the official source.
Covers force, work, power, Boyle's and Charles's gas laws, Bernoulli's principle, and basic aviation mechanics calculations.
Sample questions
The increased lift created by the blade on the right side will try to roll the helicopter to which direction?
- the back
- the front
- the left (correct answer)
- the right
The increased lift created by the blade on the right side will try to roll the helicopter to the left. If this condition is allowed to exist, it will ultimately lead to the helicopter crashing.
The increased lift created by the blade on the right side will try to roll the helicopter to the left. If this condition is allowed to exist, it will ultimately lead to the helicopter crashing.
When a rotor blade advances toward the front of the helicopter and experiences an increased velocity of airflow, what causes the blade to flap up?
- a decrease in the angle of attack
- a reduced velocity of airflow
- the flapping hinges
- the increased lift (correct answer)
When a rotor blade advances toward the front of the helicopter and experiences an increased velocity of airflow, the increase in lift causes the blade to flap up. This upward motion of the blade changes the direction of the relative wind in relation to the chord line of the blade, and causes the angle of attack to decrease.
When a rotor blade advances toward the front of the helicopter and experiences an increased velocity of airflow, the increase in lift causes the blade to flap up.
What is the end result of the flapping motion of the blades in solving dissymmetry of lift?
- the lift on the blades is equalized (correct answer)
- the advancing blade stops moving
- the blades experience reduced lift
- the helicopter rolls to the right
The retreating blade experiences a reduced velocity of airflow and reduced lift, and flaps down. The end result is the lift on the blades is equalized, and the tendency for the helicopter to roll never materializes.
The end result is the lift on the blades is equalized, and the tendency for the helicopter to roll never materializes.
What is the maximum rolling friction for the person pulling the load?
- 90 lb (correct answer)
- 18,000 ft-lb
- 12 lb
- 3 lb
The person pulling the load is not working against the total weight of the load, but rather against the rolling friction of the cart, which may be no more than 90 lb. Rolling friction is one of the three kinds of friction mentioned.
because the person pulling the load is not working against the total weight of the load, but rather against the rolling friction of the cart, which may be no more than 90 lb.
What is the unit for force in the English system of measurement?
- pounds (correct answer)
- joules
- newtons
- feet
The unit for force in the English system of measurement is pounds. In the metric system, the unit for force is newtons.
The unit for force in the English system of measurement is pounds, and in the metric system it is newtons.
Other topics on this test
-
Safety, ground operations and servicing95 questionsPractice
- Practice
-
Aircraft weight and balance98 questionsPractice
-
Aircraft materials, processes and hardware249 questionsPractice
-
Cleaning and corrosion121 questionsPractice
-
Fluid lines and fittings48 questionsPractice
-
Inspection concepts and techniques103 questionsPractice
-
Hand tools, measuring devices and electricity520 questionsPractice
-
Human factors82 questionsPractice
Sources
FAA-H-8083-30B, 2023
Questions are written from the FAA handbook. Check the current Aviation Mechanic General ACS and testing matrix before your test. ExamVerdict is not affiliated with Federal Aviation Administration (FAA). Check the official material before test day.