ExamVerdict

All tests / FAA aviation mechanic General knowledge test / Inspection concepts and techniques

FAA aviation mechanic General knowledge test: Inspection concepts and techniques practice

103 practice questions on Inspection concepts and techniques for the FAA aviation mechanic General knowledge test. Each answer comes with an explanation and the official source.

Covers dye penetrant, magnetic particle, eddy current, and ultrasonic NDT methods alongside annual and 100-hour inspection rules.

or practice the whole test

Sample questions

The penetrating radiation is projected through the part to be inspected and produces what in the film?
  1. a visible defect outline
  2. a permanent shadow picture
  3. a chemical reaction pattern
  4. an invisible or latent image (correct answer)

The penetrating radiation is projected through the part to be inspected and produces an invisible or latent image in the film. When processed, the film becomes a radiograph or shadow picture of the object.

FAA, Aviation Maintenance Technician Handbook–General (FAA-H-8083-30B), FAA-H-8083-30B, 2023, Chapter 10: Inspection concepts and techniques, part 33
The penetrating radiation is projected through the part to be inspected and produces an invisible or latent image in the film.
Radiographic inspection techniques are used to locate defects or flaws in airframe structures or engines with what?
  1. minimal disassembly and paint stripping
  2. only visual inspection of the surface
  3. no disassembly and no paint stripping (correct answer)
  4. complete disassembly and stripping of paint

Radiographic inspection techniques are used to locate defects or flaws in airframe structures or engines with little or no disassembly. This contrasts with other nondestructive testing that usually requires removal, disassembly, and stripping of paint.

FAA, Aviation Maintenance Technician Handbook–General (FAA-H-8083-30B), FAA-H-8083-30B, 2023, Chapter 10: Inspection concepts and techniques, part 33
Radiographic inspection techniques are used to locate defects or flaws in airframe structures or engines with little or no disassembly.
What are the three major steps in the x-ray process discussed?
  1. preparation, exposure, and analysis
  2. projection, imaging, and processing
  3. material assessment, defect detection, and reporting
  4. exposure to radiation, processing of film, and interpretation of the radiograph (correct answer)

Three major steps in the x-ray process are exposure to radiation, processing of film, and interpretation of the radiograph. These steps are discussed in subsequent paragraphs.

FAA, Aviation Maintenance Technician Handbook–General (FAA-H-8083-30B), FAA-H-8083-30B, 2023, Chapter 10: Inspection concepts and techniques, part 33
Three major steps in the x-ray process discussed in subsequent paragraphs are: exposure to radiation, including preparation; processing of film; and interpretation of the radiograph.
What must be reviewed to provide background information and a maintenance history of the particular aircraft?
  1. The appropriate checklist
  2. The additional publications
  3. The aircraft logbooks (correct answer)
  4. The manufacturer's service bulletins

The aircraft logbooks must be reviewed to provide background information and a maintenance history of the particular aircraft. Information gathered in this log is used to determine the aircraft condition, date of inspections, time on airframe, engines, and propellers. It reflects a history of all significant events occurring to the aircraft, its components, and accessories.

FAA, Aviation Maintenance Technician Handbook–General (FAA-H-8083-30B), FAA-H-8083-30B, 2023, Chapter 10: Inspection concepts and techniques, part 1
The aircraft logbooks must be reviewed to provide background information and a maintenance history of the particular aircraft.
What is inspected on the engine section?
  1. Cylinder compression and metal particles on screens and sump drain plugs
  2. Condition and deterioration of flexible vibration dampeners
  3. Visual evidence of excessive oil, fuel, hydraulic leaks, and sources of such leaks (correct answer)
  4. Proper torquing of studs and nuts

The engine section is inspected for visual evidence of excessive oil, fuel, hydraulic leaks, and sources of such leaks. Studs and nuts are inspected for proper torquing and obvious defects. Internal engine inspection includes checking for cylinder compression and metal particles or foreign matter on screens and sump drain plugs.

FAA, Aviation Maintenance Technician Handbook–General (FAA-H-8083-30B), FAA-H-8083-30B, 2023, Chapter 10: Inspection concepts and techniques, part 2
Engine section—for visual evidence of excessive oil, fuel, hydraulic leaks, and sources of such leaks.

Other topics on this test

Sources

Questions are written from the FAA handbook. Check the current Aviation Mechanic General ACS and testing matrix before your test. ExamVerdict is not affiliated with Federal Aviation Administration (FAA). Check the official material before test day.