ExamVerdict

All tests / FCC Element 3: General Radiotelephone (GROL) exam / Aircraft

FCC Element 3: General Radiotelephone (GROL) exam: Aircraft practice

35 practice questions on Aircraft for the FCC Element 3: General Radiotelephone (GROL) exam. Each answer comes with an explanation and the official source.

Focuses on aviation communication/navigation electronics, VOR, ILS, ADF, transponders, and ELTs.

or practice the whole test

Sample questions

What is the frequency range of the Distance Measuring Equipment (DME) used to indicate an aircraft’s slant range distance to a selected ground-based navigation station?
  1. 108.00 MHz to 117.95 MHz.
  2. 108.10 MHz to 111.95 MHz.
  3. 962 MHz to 1213 MHz. (correct answer)
  4. 329.15 MHz to 335.00 MHz.

The frequency range for Distance Measuring Equipment is 962 MHz to 1213 MHz. The other ranges listed are incorrect because they do not correspond to the established operational frequencies for DME. These alternative frequencies are used for different aviation navigation systems.

FCC Commercial Element 3 Question Pool, Approved June 25, 2009 (FCC public notice DA 09-1417), Subelement K, key topic 68, question 3-68K1
3-68K1: What is the frequency range of the Distance Measuring Equipment (DME) used to indicate an aircraft’s slant range distance to a selected ground-based navigation station? Official answer C: 962 MHz to 1213 MHz.
The Distance Measuring Equipment (DME) measures the distance from the aircraft to the DME ground station. This is referred to as:
  1. DME bearing.
  2. The slant range. (correct answer)
  3. Glide Slope angle of approach.
  4. Localizer course width.

The slant range is the direct distance measured between the aircraft and the ground station by DME. DME does not measure the bearing, glide slope angle of approach, or localizer course width. These other options measure different navigational parameters entirely.

FCC Commercial Element 3 Question Pool, Approved June 25, 2009 (FCC public notice DA 09-1417), Subelement K, key topic 68, question 3-68K2
3-68K2: The Distance Measuring Equipment (DME) measures the distance from the aircraft to the DME ground station. This is referred to as: Official answer B: The slant range.
The Distance Measuring Equipment (DME) ground station has a built-in delay between reception of an interrogation and transmission of the reply to allow:
  1. Someone to answer the call.
  2. The VOR to make a mechanical hook-up.
  3. Operation at close range. (correct answer)
  4. Clear other traffic for a reply.

The built-in delay is necessary for DME to function correctly when aircraft are operating at close range. The other options do not describe the technical requirement for the DME system to operate accurately at short distances.

FCC Commercial Element 3 Question Pool, Approved June 25, 2009 (FCC public notice DA 09-1417), Subelement K, key topic 68, question 3-68K3
3-68K3: The Distance Measuring Equipment (DME) ground station has a built-in delay between reception of an interrogation and transmission of the reply to allow: Official answer C: Operation at close range.
What is the main underlying operating principle of an aircraft’s Distance Measuring Equipment (DME)?
  1. A measurable amount of time is required to send and receive a radio signal through the Earth’s atmosphere. (correct answer)
  2. The difference between the peak values of two DC voltages may be used to determine an aircraft’s distance to another aircraft.
  3. A measurable frequency compression of an AC signal may be used to determine an aircraft’s altitude above the earth.
  4. A phase inversion between two AC voltages may be used to determine an aircraft’s distance to the exit ramp of an airport’s runway.

DME determines distance by measuring the time it takes for a radio signal to travel to and from a ground station. The other choices describe unrelated principles, such as voltage differences, frequency compression for altitude, or phase inversion for runway distance. Time-based ranging is the fundamental operation of DME.

FCC Commercial Element 3 Question Pool, Approved June 25, 2009 (FCC public notice DA 09-1417), Subelement K, key topic 68, question 3-68K4
3-68K4: What is the main underlying operating principle of an aircraft’s Distance Measuring Equipment (DME)? Official answer A: A measurable amount of time is required to send and receive a radio signal through the Earth’s atmosphere.
What radio navigation aid determines the distance from an aircraft to a selected VORTAC station by measuring the length of time the radio signal takes to travel to and from the station?
  1. RADAR.
  2. Loran C.
  3. Distance Marking (DM).
  4. Distance Measuring Equipment (DME). (correct answer)

Distance Measuring Equipment (DME) operates by sending a pulse from the aircraft to the station and measuring the time it takes for the signal to return, which is then converted into a distance measurement. RADAR is a system used for detection and tracking rather than navigation, Loran C is a low-frequency terrestrial navigation system that does not use time-of-flight pulses for distance, and Distance Marking is not a recognized radio navigation aid.

FCC Commercial Element 3 Question Pool, Approved June 25, 2009 (FCC public notice DA 09-1417), Subelement K, key topic 68, question 3-68K5
3-68K5: What radio navigation aid determines the distance from an aircraft to a selected VORTAC station by measuring the length of time the radio signal takes to travel to and from the station? Official answer D: Distance Measuring Equipment (DME).

Other topics on this test

Sources

FCC Commercial Element 3 Question Pool
Approved June 25, 2009 (FCC public notice DA 09-1417)

Check the current pool on fcc.gov and with your COLEM before your exam. ExamVerdict is not affiliated with Federal Communications Commission (FCC), given by COLEMs. Check the official material before test day.