All tests / FCC Element 3: General Radiotelephone (GROL) exam / Marine
FCC Element 3: General Radiotelephone (GROL) exam: Marine practice
26 practice questions on Marine for the FCC Element 3: General Radiotelephone (GROL) exam. Each answer comes with an explanation and the official source.
Focuses on GMDSS watchkeeping, DSC radios, SART, EPIRBs, and shipboard MF/HF/VHF installations.
Sample questions
What is the channel spacing used for VHF marine radio?
- 10 kHz.
- 12.5 kHz.
- 20 kHz.
- 25 kHz. (correct answer)
The standard channel spacing for VHF marine radio is 25 kHz. The other values, 10 kHz, 12.5 kHz, and 20 kHz, do not conform to the established technical specifications for this radio band.
3-85N1: What is the channel spacing used for VHF marine radio? Official answer D: 25 kHz.
What VHF channel is assigned for distress and calling?
- 70
- 16 (correct answer)
- 21A
- 68
VHF channel 16 is internationally designated for distress and calling, as established by maritime radio regulations. Channel 70, 21A, and 68 are assigned for other specific operational uses and do not serve as the primary distress frequency.
3-85N2: What VHF channel is assigned for distress and calling? Official answer B: 16
What VHF Channel is used for Digital Selective Calling and acknowledgement?
- 16
- 21A
- 70 (correct answer)
- 68
VHF Channel 70 is specifically designated for Digital Selective Calling and acknowledgement. Channel 16 is for distress and hailing, while 21A and 70 are not the standard channels for this function.
3-85N3: What VHF Channel is used for Digital Selective Calling and acknowledgement? Official answer C: 70
Maximum allowable frequency deviation for VHF marine radios is:
- +/- 5 kHz. (correct answer)
- +/- 15 kHz.
- +/- 2.5 kHz.
- +/- 25 kHz.
The maximum allowable frequency deviation for VHF marine radios is indeed +/- 5 kHz. The other options, such as +/- 15 kHz, +/- 2.5 kHz, and +/- 25 kHz, exceed the internationally recognized operational limits for this equipment. Adhering to +/- 5 kHz ensures proper communication within the designated marine frequency band.
3-85N4: Maximum allowable frequency deviation for VHF marine radios is: Official answer A: +/- 5 kHz.
What is the reason for the USA-INT control or function?
- It changes channels that are normally simplex channels into duplex channels.
- It changes some channels that are normally duplex channels into simplex channels. (correct answer)
- When the control is set to “INT” the range is increased.
- None of the above.
The USA-INT control specifically modifies some channels that are typically duplex to operate as simplex. The other options incorrectly describe the function; for instance, it does not convert simplex channels to duplex channels, nor does setting the control to “INT” increase the range.
3-85N5: What is the reason for the USA-INT control or function? Official answer B: It changes some channels that are normally duplex channels into simplex channels.
Other topics on this test
-
Principles44 questionsPractice
-
Electrical Math48 questionsPractice
-
Components53 questionsPractice
-
Digital Logic42 questionsPractice
-
Receivers46 questionsPractice
-
Transmitters34 questionsPractice
-
Antennas24 questionsPractice
-
Aircraft35 questionsPractice
-
Installation, Maintenance & Repair46 questionsPractice
-
Radar27 questionsPractice
-
Satellite24 questionsPractice
Sources
Approved June 25, 2009 (FCC public notice DA 09-1417)
Check the current pool on fcc.gov and with your COLEM before your exam. ExamVerdict is not affiliated with Federal Communications Commission (FCC), given by COLEMs. Check the official material before test day.