All tests / FCC Element 3: General Radiotelephone (GROL) exam / Transmitters
FCC Element 3: General Radiotelephone (GROL) exam: Transmitters practice
34 practice questions on Transmitters for the FCC Element 3: General Radiotelephone (GROL) exam. Each answer comes with an explanation and the official source.
Covers RF power stages, spurious suppression, frequency stability, SWR protection, and dummy loads.
Sample questions
What class of amplifier is distinguished by the presence of output throughout the entire signal cycle and the input never goes into the cutoff region?
- Class A. (correct answer)
- Class B.
- Class C.
- Class D.
Class A amplifiers conduct current throughout the entire input signal cycle, ensuring the input never enters the cutoff region. Class B and Class C amplifiers only conduct current for part of the cycle, and Class D uses switching rather than continuous conduction. Therefore, Class A is the only type meeting both criteria.
3-51G1: What class of amplifier is distinguished by the presence of output throughout the entire signal cycle and the input never goes into the cutoff region? Official answer A: Class A.
What is the distinguishing feature of a Class A amplifier?
- Output for less than 180 degrees of the signal cycle.
- Output for the entire 360 degrees of the signal cycle. (correct answer)
- Output for more than 180 degrees and less than 360 degrees of the signal cycle.
- Output for exactly 180 degrees of the input signal cycle.
A Class A amplifier conducts current for the entire 360 degrees of the signal cycle, ensuring minimal signal distortion. The other options describe partial conduction angles, which result in less efficient amplification than Class A. For example, output for less than 180 degrees of the signal cycle is characteristic of other amplifier classes.
3-51G2: What is the distinguishing feature of a Class A amplifier? Official answer B: Output for the entire 360 degrees of the signal cycle.
Which class of amplifier has the highest linearity and least distortion?
- Class A. (correct answer)
- Class B.
- Class C.
- Class AB.
Class A amplifiers operate with a constant, large quiescent current, which minimizes signal-dependent variations. Class B and Class C amplifiers use smaller bias currents, leading to crossover distortion and other non-linearities. Class AB offers a compromise but is not as linear as Class A.
3-51G3: Which class of amplifier has the highest linearity and least distortion? Official answer A: Class A.
Which class of amplifier provides the highest efficiency?
- Class A.
- Class B.
- Class C. (correct answer)
- Class AB.
Class C amplifiers achieve the highest efficiency because they operate with a large portion of the transistor in cutoff. Class A, Class B, and Class AB all allow for significant power dissipation, resulting in lower overall efficiency compared to Class C.
3-51G4: Which class of amplifier provides the highest efficiency? Official answer C: Class C.
What class of amplifier is distinguished by the bias being set well beyond cutoff?
- Class A.
- Class C. (correct answer)
- Class B.
- Class AB.
Class C amplifiers operate with a bias point significantly past the cutoff frequency to achieve high efficiency. Class A, Class B, and Class AB all have bias points closer to or within the cutoff region, which limits their primary operational characteristic of high efficiency.
3-51G5: What class of amplifier is distinguished by the bias being set well beyond cutoff? Official answer B: Class C.
Other topics on this test
-
Principles44 questionsPractice
-
Electrical Math48 questionsPractice
-
Components53 questionsPractice
-
Digital Logic42 questionsPractice
-
Receivers46 questionsPractice
-
Antennas24 questionsPractice
-
Aircraft35 questionsPractice
-
Installation, Maintenance & Repair46 questionsPractice
-
Marine26 questionsPractice
-
Radar27 questionsPractice
-
Satellite24 questionsPractice
Sources
Approved June 25, 2009 (FCC public notice DA 09-1417)
Check the current pool on fcc.gov and with your COLEM before your exam. ExamVerdict is not affiliated with Federal Communications Commission (FCC), given by COLEMs. Check the official material before test day.