All tests / FCC Element 3: General Radiotelephone (GROL) exam / Electrical Math
FCC Element 3: General Radiotelephone (GROL) exam: Electrical Math practice
48 practice questions on Electrical Math for the FCC Element 3: General Radiotelephone (GROL) exam. Each answer comes with an explanation and the official source.
Tests AC/DC algebra, decibels, resonant frequency calculations, reactive power, and wavelength conversions.
Sample questions
What value of series resistor would be needed to obtain a full scale deflection on a 50 microamp DC meter with an applied voltage of 200 volts DC?
- 4 megohms. (correct answer)
- 2 megohms.
- 400 kilohms.
- 200 kilohms.
To achieve full scale deflection, the series resistor must limit the current to 50 microamps when 200 volts is applied. Calculating this requires dividing the voltage by the desired current, which yields 4 megohms. The other values would result in currents either too high or too low for full scale deflection.
3-9B1: What value of series resistor would be needed to obtain a full scale deflection on a 50 microamp DC meter with an applied voltage of 200 volts DC? Official answer A: 4 megohms.
Which of the following Ohms Law formulas is incorrect?
- I = E / R
- I = R / E (correct answer)
- E = I x R
- R = E / I
The formula I = R / E is incorrect because Ohm's Law states that current (I) equals voltage (E) divided by resistance (R). The other options correctly represent the relationships derived from Ohm's Law, such as E = I x R.
3-9B2: Which of the following Ohms Law formulas is incorrect? Official answer B: I = R / E
If a current of 2 amperes flows through a 50-ohm resistor, what is the voltage across the resistor?
- 25 volts.
- 52 volts.
- 200 volts.
- 100 volts. (correct answer)
According to Ohm's Law, voltage equals current multiplied by resistance (V=IR). Multiplying 2 amperes by 50 ohms correctly yields 100 volts. The other choices do not result from this fundamental relationship between current, resistance, and voltage.
3-9B3: If a current of 2 amperes flows through a 50-ohm resistor, what is the voltage across the resistor? Official answer D: 100 volts.
If a 100-ohm resistor is connected across 200 volts, what is the current through the resistor?
- 2 amperes. (correct answer)
- 1 ampere.
- 300 amperes.
- 20,000 amperes.
Ohm's Law states that current equals voltage divided by resistance, so 200 volts divided by 100 ohms is 2 amperes. The other choices are incorrect because they do not result from this simple calculation. For example, 1 ampere would require a 100-ohm resistor across 100 volts.
3-9B4: If a 100-ohm resistor is connected across 200 volts, what is the current through the resistor? Official answer A: 2 amperes.
If a current of 3 amperes flows through a resistor connected to 90 volts, what is the resistance?
- 3 ohms.
- 30 ohms. (correct answer)
- 93 ohms.
- 270 ohms.
Ohm's law states that resistance equals voltage divided by current. Dividing 90 volts by 3 amperes correctly yields 30 ohms. The other choices do not result from this calculation.
3-9B5: If a current of 3 amperes flows through a resistor connected to 90 volts, what is the resistance? Official answer B: 30 ohms.
Other topics on this test
-
Principles44 questionsPractice
-
Components53 questionsPractice
-
Digital Logic42 questionsPractice
-
Receivers46 questionsPractice
-
Transmitters34 questionsPractice
-
Antennas24 questionsPractice
-
Aircraft35 questionsPractice
-
Installation, Maintenance & Repair46 questionsPractice
-
Marine26 questionsPractice
-
Radar27 questionsPractice
-
Satellite24 questionsPractice
Sources
Approved June 25, 2009 (FCC public notice DA 09-1417)
Check the current pool on fcc.gov and with your COLEM before your exam. ExamVerdict is not affiliated with Federal Communications Commission (FCC), given by COLEMs. Check the official material before test day.