ExamVerdict

All tests / FCC Element 3: General Radiotelephone (GROL) exam / Installation, Maintenance & Repair

FCC Element 3: General Radiotelephone (GROL) exam: Installation, Maintenance & Repair practice

46 practice questions on Installation, Maintenance & Repair for the FCC Element 3: General Radiotelephone (GROL) exam. Each answer comes with an explanation and the official source.

Tests troubleshooting methodology, spectrum/oscilloscope measurement, soldering, and FCC technician log sign-offs.

or practice the whole test

Sample questions

What is a 1/2 digit on a DMM?
  1. Smaller physical readout on the left side of the display.
  2. Partial extended accuracy on lower part of the range. (correct answer)
  3. Smaller physical readout on the right side.
  4. Does not apply to DMMs.

A 1/2 digit indicates partial extended accuracy when measuring within the lower part of a selected range. The other options describe physical display features or state that it is inapplicable, which is incorrect for DMMs. This feature provides more precision than the standard resolution within that range.

FCC Commercial Element 3 Question Pool, Approved June 25, 2009 (FCC public notice DA 09-1417), Subelement L, key topic 74, question 3-74L1
3-74L1: What is a 1/2 digit on a DMM? Official answer B: Partial extended accuracy on lower part of the range.
A 50 microampere meter movement has an internal resistance of 2,000 ohms. What applied voltage is required to indicate half-scale deflection?
  1. 0.01 volts
  2. 0.10 volts
  3. 0.005 volts.
  4. 0.05 volts. (correct answer)

The required voltage is calculated using Ohm's law, as half-scale deflection means half of the full-scale current is needed. The other choices represent incorrect current or voltage calculations based on the meter's specifications.

FCC Commercial Element 3 Question Pool, Approved June 25, 2009 (FCC public notice DA 09-1417), Subelement L, key topic 74, question 3-74L2
3-74L2: A 50 microampere meter movement has an internal resistance of 2,000 ohms. What applied voltage is required to indicate half-scale deflection? Official answer D: 0.05 volts.
What is the purpose of a series multiplier resistor used with a voltmeter?
  1. It is used to increase the voltage-indicating range of the voltmeter. (correct answer)
  2. A multiplier resistor is not used with a voltmeter.
  3. It is used to decrease the voltage-indicating range of the voltmeter.
  4. It is used to increase the current-indicating range of an ammeter, not a voltmeter.

A series multiplier resistor increases the voltage the voltmeter can safely measure without damaging it. Decreasing the range or increasing the current range are incorrect functions for this component with a voltmeter. The function is specifically to extend the voltage measurement capability.

FCC Commercial Element 3 Question Pool, Approved June 25, 2009 (FCC public notice DA 09-1417), Subelement L, key topic 74, question 3-74L3
3-74L3: What is the purpose of a series multiplier resistor used with a voltmeter? Official answer A: It is used to increase the voltage-indicating range of the voltmeter.
What is the purpose of a shunt resistor used with an ammeter?
  1. A shunt resistor is not used with an ammeter.
  2. It is used to decrease the ampere indicating range of the ammeter.
  3. It is used to increase the ampere indicating range of the ammeter. (correct answer)
  4. It is used to increase the voltage indicating range of the voltmeter, not the ammeter.

A shunt resistor allows a large current to bypass the ammeter while still registering the full current. The other options are incorrect because the shunt increases the current range, not decreases it. It specifically affects the ampere range, not the voltage range of a voltmeter.

FCC Commercial Element 3 Question Pool, Approved June 25, 2009 (FCC public notice DA 09-1417), Subelement L, key topic 74, question 3-74L4
3-74L4: What is the purpose of a shunt resistor used with an ammeter? Official answer C: It is used to increase the ampere indicating range of the ammeter.
What instrument is used to indicate high and low digital voltage states?
  1. Ohmmeter.
  2. Logic probe. (correct answer)
  3. Megger.
  4. Signal strength meter.

A logic probe is specifically designed to clearly indicate high and low digital voltage states. An Ohmmeter measures resistance, a Megger tests insulation resistance, and a Signal strength meter measures signal power, none of which serve this digital indication purpose.

FCC Commercial Element 3 Question Pool, Approved June 25, 2009 (FCC public notice DA 09-1417), Subelement L, key topic 74, question 3-74L5
3-74L5: What instrument is used to indicate high and low digital voltage states? Official answer B: Logic probe.

Other topics on this test

Sources

FCC Commercial Element 3 Question Pool
Approved June 25, 2009 (FCC public notice DA 09-1417)

Check the current pool on fcc.gov and with your COLEM before your exam. ExamVerdict is not affiliated with Federal Communications Commission (FCC), given by COLEMs. Check the official material before test day.