All tests / FCC Element 3: General Radiotelephone (GROL) exam / Principles
FCC Element 3: General Radiotelephone (GROL) exam: Principles practice
44 practice questions on Principles for the FCC Element 3: General Radiotelephone (GROL) exam. Each answer comes with an explanation and the official source.
Covers basic electrical theory, FCC licensing rules, radio wave behavior, and acoustic/audio fundamentals in the FCC Element 3 GROL pool.
Sample questions
The product of the readings of an AC voltmeter and AC ammeter is called:
- Apparent power. (correct answer)
- True power.
- Power factor.
- Current power.
The product of the readings of an AC voltmeter and AC ammeter is defined as apparent power. True power accounts for the phase difference between voltage and current, which is not included in the simple product. Power factor is the ratio of true power to apparent power, not the product itself. Current power is not a standard term for this calculation.
3-1A1: The product of the readings of an AC voltmeter and AC ammeter is called: Official answer A: Apparent power.
What is the basic unit of electrical power?
- Ohm.
- Watt. (correct answer)
- Volt.
- Ampere.
The Watt is the standard unit specifically defined for electrical power. Ohm measures electrical resistance, Volt measures electrical potential difference, and Ampere measures electric current. Therefore, Watt is the correct basic unit for power.
3-1A2: What is the basic unit of electrical power? Official answer B: Watt.
What is the term used to express the amount of electrical energy stored in an electrostatic field?
- Joules. (correct answer)
- Coulombs.
- Watts.
- Volts.
Joules is the standard unit for measuring energy, which includes the energy stored in an electrostatic field. Coulombs measure electric charge, Watts measure power, and Volts measure electric potential difference, none of which represent stored energy directly.
3-1A3: What is the term used to express the amount of electrical energy stored in an electrostatic field? Official answer A: Joules.
What device is used to store electrical energy in an electrostatic field?
- Battery.
- Transformer.
- Capacitor. (correct answer)
- Inductor.
A capacitor is specifically designed to store electrical energy within an electrostatic field. A battery stores energy chemically, a transformer changes voltage, and an inductor stores energy in a magnetic field.
3-1A4: What device is used to store electrical energy in an electrostatic field? Official answer C: Capacitor.
What formula would determine the inductive reactance of a coil if frequency and coil inductance are known?
- XL = pi f L
- XL = 2 pi f L (correct answer)
- XL = 1 / 2 pi f C
- XL = 1 / R2+X2
The official answer is correct because inductive reactance is directly proportional to frequency and inductance, calculated using the standard formula where inductive reactance equals two times pi times the frequency in hertz times the inductance in henrys. The other choices represent different electrical formulas, such as capacitive reactance or impedance, rather than the inductive reactance of a coil.
3-1A5: What formula would determine the inductive reactance of a coil if frequency and coil inductance are known? Official answer B: XL = 2 pi f L
Other topics on this test
-
Electrical Math48 questionsPractice
-
Components53 questionsPractice
-
Digital Logic42 questionsPractice
-
Receivers46 questionsPractice
-
Transmitters34 questionsPractice
-
Antennas24 questionsPractice
-
Aircraft35 questionsPractice
-
Installation, Maintenance & Repair46 questionsPractice
-
Marine26 questionsPractice
-
Radar27 questionsPractice
-
Satellite24 questionsPractice
Sources
Approved June 25, 2009 (FCC public notice DA 09-1417)
Check the current pool on fcc.gov and with your COLEM before your exam. ExamVerdict is not affiliated with Federal Communications Commission (FCC), given by COLEMs. Check the official material before test day.